X
About Us

Ratnaraj an experience of about two decades we at Ratnaraj are an ISO 9001:2015 Certified company engaged in manufacturing, supplying and exporting superior quality products like Sheets, Plates & Coils, Pipes & Tubes, Bars & Rods, Fittings, Raw Materials etc.

Contact Info
  • Ground Floor 6, 36 40, Bhanushali Bhuvan, Dudadni Metal Corpn, Cawasji Patel Tank Road, Mumbai 37, 2nd Carpenter Street, Mumbai-400004, Maharashtra, India.
  • +91-22-6636-8425
  • [email protected]

Thechnical Info

  • Home
  • Thechnical Info
  • Chemical Copositions

    CHEMICAL COMPOSITION ( IN PERCENTAGE )

    Grade

    c

    (Max)

    Mn (Max)

    p

    (Max)

    s

    (Max)

    Si (Max)

    Cr

    Ni

    Mo

    Nitrogen (Max)

    Cu/ Others

    301

    0.15

    2.00

    0.045

    0.030

    1.00

    16.00 -

    6.00 

    -

    0.10

     -

     -

    -

     -

     -

     -

     -

    18.00

    8.00

     -

     -

     -

    304

    0.08

    2.00

    0.045

    0.030

    0.75

    18.00 -

    8.00-

     -

    0.10

     -

     -

    -

     -

     -

     -

     -

    20.00

    10.50

     -

     -

     -

    304L

    0.030

    2.00

    0.045

    0.030

    0.75

    18.00 -

    8.00-

     -

    0.10

     -

     -

    -

     -

     -

     -

     -

    20.00

    12.00

     -

     -

     -

    310S

    0.08

    2.00

    0.045

    0.030

    1.50

    24.00-

    19.00 

     -

     -

     -

     -

    -

     -

     -

     -

     -

    26.00

    22.00

     -

     -

     -

    316

    0.08

    2.00

    0.045

    0.030

    0.75

    16.00 -

    10.00 

    2.00 

    0.10

     -

     -

    -

     -

     -

     -

     -

    18.00

    14.00

    3.00

    		  

     -

    316L

    0.030

    2.00

    0.045

    0.030

    0.75

    16.00 -

    10.00 

    2.00 -

    0.10

     -

     -

    -

     -

     -

     -

     -

    18.00

    14.00

    3.00

    		  

     -

    317

    0.08

    2.00

    0.045

    0.030

    0.75

    18.00 -

    11.00 -

    3.00 -

    0.10

     -

     -

    -

     -

     -

     -

     -

    20.00

    14.00

    4.00

    		  

     -

    317L

    0.030

    2.00

    0.045

    0.030

    0.75

    18.00 -

    11.00 -

    3.00 -

    0.10

     -
       

     -

     -

     -

     -

    20.00

    15.00

    4.00

     -

     -

    321

    0.08

    2.00

    0.045

    0.030

    0.75

    17.00 -

    9.00 -

     -

    0.10

    Ti5 ( C + N ) Min

     -

    -

     -

     -

     -

     -

    19.00

    12.00

     -

     -

    or 0.70 max

    347

    0.08

    2.00

    0.045

    0.030

    0.75

    17.00 -

    9.00 -

     -

     -

    Cb= 10x ( C Min )

     -

    -

     -

     -

     -

     -

    19.00

    13.00

     -

     -

    or 1.00 Max

    409

    0.08

    1.00

    0.040

    0.010

    1.00

    10.50 -

    0.50

     -

     -

    Ti= 6x (C+ N ) Min

     -

    -

     -

     -

     -

     -

    11.75

     -

     -

     -

    or 0.70 Max

    409M

    0.03

    0.81.2

    0.030

    0.030

    0.40.75

    11.00-

    1.5 max.

     -

     -

    Ti= 6x (C) Min or

     -

    -

     -

     -

     -

     -

    12.00

     -

     -

     -

    0.70 Max

    410S

    0.08

    1.00

    0.040

    0.030

    1.00

    11.50-

    0.60

     -

     -

     -

     -

    -

     -

    		  

     -

     -

    13.50

     -

     -

     -

     -

    410

    0.15

    1.00

    0.040

    0.030

    1.00

    11.50-

    0.75

     -

     -

     -

     -

    -

     -

     -

     -

     -

    13.50

     -

     -

     -

     -

    420

    0.35

    0.50

    0.035

    0.0 15

    0.50

    12.00 -

    0.20.3

     -

     -

     -

     -

    -

     -

     -

     -

     -

    13.00

     -

     -

     -

     -

    430

    0.12

    1.00

    0.040

    0.030

    1.00

    16.00 -

    0.75

     -

     -

     -

     -

    -

     -

     -

     -

     -

    18.00

     -

     -

     -

     -

    JSL

    0.08

    7.08.0

    0.070

    0.030

    0.75

    15.50 -

    4.25 

     -

     -

    0.9 - 1.10

    AUS

     -

     -

     -

     -

     -

    16.50

    4.75

     -

     -

     -

    JS-

    0.08

    9.2510.25

    0.070

    0.030

    0.75

    14.25 -

    2.25 

     -

     -

    1.60- 2.0

    203

     -

     -

     -

     -

     -

    15.25

    2.75

     -

     -

     -

    30 1M

    0.10

    4.55.5

    0.060

    0.030

    0.75

    14.50 -

    6.0 - 7.0

     -

     -

    1.70- 1.90

     -

     -

     -

     -

     -

     -

    15.50

     -

     -

     -

     -
    • Thickness of 1.27mm & below will have elongation of 20%

    Chemical Composition Limits For Aluminum Alloys

    Alloy

    Si

    Fe

    Cu

    Mn

    Mg

    Cr

    Zn

    Ti

    OTHERS

    OTHERS

    Al

    EACH

    TOTAL

    MIN.

    1070

    0.20

    0.25

    0.04

    0.03

    0.03

    —

    0.04

    0.03

    0.03

    —

    99.70

    1060

    0.25

    0.35

    0.05

    0.03

    0.03

    —

    0.05

    0.03

    0.03

    —

    99.60

     

    1050

    0.25

    0.40

    0.05

    0.05

    0.05

    —

    0.05

    0.03

    0.03

    —

    99.50

    1350

    0.10

    0.40

    0.05

    0.01

    —

    0.01

    0.05

    —

    0.03

    0.10

    99.50

    1145

    0.55 Si + Fe

    0.05

    0.05

    0.05

    —

    0.05

    0.03

    0.03

    —

    99.45

    1100

    0.95 Si + Fe

    0.05-0.20

    0.05

    —

    —

    0.10

    —

    0.05

    0.15

    99.00

    2024

    0.50

    0.50

    3.8-4.9

    0.30-0.9

    1.2-1.8

    0.10

    0.25

    0.15

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    3003

    0.6

    0.7

    0.05-0.20

    1.0-1.5

    —

    —

    0.10

    —

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    3004

    0.30

    0.7

    0.25

    1.0-1.5

    0.8-1.3

    —

    0.25

    —

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    3005

    0.6

    0.7

    0.30

    1.0-1.5

    0.20-0.6

    0.10

    0.25

    0.10

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    3104

    0.6

    0.8

    0.05-0.25

    0.8-1.4

    0.8-1.3

    —

    0.25

    0.10

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    4004

    9.0-10.5

    0.8

    0.25

    0.10

    1.0-2.0

    —

    0.20

    —

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    4104

    9.0-10.5

    0.8

    0.25

    0.10

    1.0-2.0

    —

    0.20

    —

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    4043

    4.5-6.0

    0.8

    0.30

    0.05

    0.05

    —

    0.10

    0.20

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    4045

    9.0-11.0

    0.8

    0.30

    0.05

    0.05

    —

    0.10

    0.20

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    5005

    0.30

    0.7

    0.20

    0.20

    0.50-1.1

    0.10

    0.25

    —

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    5050

    0.40

    0.7

    0.20

    0.10

    1.1-1.8

    0.10

    0.25

    —

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    5052

    0.25

    0.40

    0.10

    0.10

    2.2-2.8

    0.15-0.35

    0.10

    —

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    5252

    0.08

    0.10

    0.10

    0.10

    2.2-2.8

    —

    0.05

    —

    0.03

    0.10

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    5056

    0.30

    0.40

    0.10

    0.05-0.20

    4.5-5.6

    0.05-0.20

    0.10

    —

    0.05

    0.15

    Rem.

     

     

     

     

     

     

     

     

     

     

     

     

    5657

    0.08

    0.10

    0.10

    0.03

    0.6-1.0

    —

    0.05

    —

    0.02

    0.05

    Rem.

    5182

    0.20

    0.35

    0.15

    0.20-0.50

    4.0-5.0

    0.10

    0.25

    0.10

    0.05

    0.15

    Rem.

    6061

    0.40-0.8

    0.7

    0.15-0.40

    0.15

    0.8-1.2

    0.04-0.35

    0.25

    0.15

    0.05

    0.15

    Rem.

    7075

    0.40

    0.50

    1.2-2.0

    0.30

    2.1-2.9

    0.18-0.28

    5.1-6.1

    0.20

    0.05

    0.15

    Rem.

    Chemical Composition For Copper Alloys

    Material designation
    COMPOSITION %
    Element
    Cu
    Ag
    Bi
    O
    P
    Pb
    Other elements (see note)
    Symbol
    Number
    Total
    Excluding
    Cu-ETP
    CW004A
    min.
    max.
    99,90(1)
    -
    -
    -
    -
    0,0005
    -
    0,040(2)
    -
    -
    -
    0,005
    -
    0,03
    Ag. O
    Cu-FRHC
    CW005A
    min.
    max.
    99,90(1)
    -
    -
    -
    -
    -
    -
    0,040(2)
    -
    -
    -
    -
    -
    0,04
    Ag. O
    Cu-OF
    CW008A
    min.
    max.
    99,95(1)
    -
    -
    -
    -
    0,0005
    - 
    -(3)
    -
    -
    -
    0,005
    -
    0,03
    Ag.
    CuAg 0,04
    CW0011A
    min.
    max.
    Balance
    -
    0,03
    0,05
    -
    0,0005
    -
    0,040
    -
    -
    -
    -
    -
    0,03
    Ag. O
    CuAg 0,07
    CW0012A
    min.
    max.
    Balance
    -
    0,06
    0,08
    -
    0,0005
    -
    0,040
    -
    -
    -
    -
    -
    0,03
    Ag. O
    CuAg 0,10
    CW0013A
    min.
    max.
    Balance
    -
    0,08
    0,12
    -
    0,0005
    -
    0,040
    -
    -
    -
    -
    -
    0,03
    Ag. O
    CuAg 0,04P
    CW0014A
    min.
    max.
    Balance
    -
    0,03
    0,05
    -
    0,0005
    - 
    -(3)
    0,001
    0,007
    -
    -
    -
    0,03
    Ag. P
    CuAg 0,07P
    CW0015A
    min.
    max.
    Balance
    -
    0,06
    0,08
    -
    0,0005
    -
    -(3)
    0,001
    0,007
    -
    -
    -
    0,03
    Ag. P
    CuAg 0,10P
    CW0016A
    min.
    max.
    Balance
    -
    0,08
    0,12
    -
    0,0005
    - 
    -(3)
    0,001
    0,007
    -
    -
    -
    0,03
    Ag. P
    CuAg 0,04(OF)
    CW0017A
    min.
    max.
    Balance
    -
    0,03
    0,05
    -
    0,0005
    - 
    -(3)
    -
    -
    -
    -
    -
    0,0065
    Ag. O
    CuAg 0,07(OF)
    CW0018A
    min.
    max.
    Balance
    -
    0,06
    0,08
    -
    0,0005
    - 
    -(3)
    -
    -
    -
    -
    -
    0,0065
    Ag. O
    CuAg 0,10(OF)
    CW0019A
    min.
    max.
    Balance
    -
    0,08
    0,12
    -
    0,0005
    -
    -(3)
    -
    -
    -
    -
    -
    0,0065
    Ag. O
    Cu-PHC
    CW0020A
    min.
    max.
    99,95(1)
    -
    -
    -
    -
    0,0005
    - 
    -(3)
    0,001
    0,006
    -
    0,005
    -
    0,03
    Ag. P
    Cu-HCP
    CW0021A
    min.
    max.
    99,95(1)
    -
    -
    -
    -
    0,0005
    - 
    -(3)
    0,002
    0,007
    -
    0,005
    -
    0,03
    Ag. P
    NOTE: the balance of the other elements (excluding copper) is defined as the sum of Ag, As, Bi, Cd, Co, Cr, Fe, Mn, Ni, 0, P, Pb, S, Sb, Se, Si, Sn, Te and Zn, excluding the other elements for which the value is already indicated.
    (1)  Including silver, up to a maximum of 0.015%.
    (2) An oxygen content of 0.060% is permitted, with a prior agreement beteween the seller and the buyer.
    (3) Then oxygen content must be in accordance with the hydrogen embrittelment test. of EN 1976.

    Chemical Composition Of Brass Steel Alloys

    UNS No. AS No. Common Name BSI No. ISO No. JIS No. Copper % Zinc % Lead % Other
    C21000 210 95/5 Gilding metal - CuZn5 C2100 94–96 ~5 -
    C22000 220 90/10 Gilding metal CZ101 CuZn10 C2200 89–91 ~10 -
    C23000 230 85/15 Gilding metal Cz103 CuZn20 C2300 84–86 ~15 -
    C24000 240 80/20 Gilding metal Cz103 CuZn20 C2400 78.5–81.5 ~20 -
    C26130 259 70/30 Arsenical brass Cz126 CuZn30As C4430 69–71 ~30 Arsenic
    0.02–0.06
    C26000 260 70/30 Brass Cz106 CuZn30 C2600 68.5–71.5 ~30 -
    C26800 268 Yellow brass (65/35) Cz107 CuZn33 C2680 64–68.5 ~33 -
    C27000 270 65/35 Wire brass Cz107 CuZn35 - 63–68.5 ~35 -
    C27200 272 63/37 Common brass Cz108 CuZn37 C2720 62–65 ~37 -
    C35600 356 Engraving brass,
    2% lead    		 - CuZn39Pb2 C3560 59–64.5 ~39 2.0–3.0 -
    C37000 370 Engraving brass,
    1% lead    		 - CuZn39Pb1 C3710 59–62 ~39 0.9–1.4 -
    C38000 380 Section brass Cz121 CuZn43Pb3 - 55–60 ~43 1.5–3.0 Aluminum 0.1-0.6
    C38500 385 Free cutting brass Cz121 CuZn39Pb3 - 56–60 ~39 2.5–4.5 -
  • Mechanical Compositions
    MECHANICAL PROPERTIES
    Grade Tensile Yield %Age Hardness (Max)
    Strength Mpa, Strength Elongation
    (Min) Mpa, (Min) in 50mm BHN Rb
    gauge length min
    301 515 205 40 217 95
    304 515 205 40 201 92
    304L 485 170 40 201 92
    310S 515 205 40 217 95
    316 515 205 40 217 95
    316L 485 170 40 217 95
    317 515 205 35 217 95
    317L 515 205 40 217 95
    321 515 205 40 217 95
    347 515 205 40 201 92
    409 380 170 20 179 88
    409M 430 275 20 187 90
    410S 415 205 22 183 89
    410 450 205 20 217 89
    420 700( max ) - 15 217 95
    430 450 205 22 183 89
    JSL AUS 515 205 40 217 95
    JS-203 515 205 40 217 95
    301M 515 205 40 217 95
    Grade
    Tensile Strength Mpa(Min)
    Yield Strength Mpa(Min)
    %Age Elongation in 50mm gauge length min
    Hardness(Max)
    BHN
    Rb
    301 515 205 40 217 95
    304 515 205 40 201 92
    304L 485 170 40 201 95
    310S 515 205 40 217 95
    316 515 205 40 217 95
    316L 485 170 40 217 95
    317 515 205 35 217 95
    317L 515 205 40 217 95
    321 515 205 40 217 95
    347 515 205 40 201 92
    409 380 170 20 179 88
    409M 430 275 20 187 90
    410S 415 205 22 183 89
    410 450 205 20 217 89
    420 700(max) - 15 217 95
    430 450 205 22 183 89
    JSL AUS 515 205 40 217 95
    JS-203 515 205 40 217 95
    301M 515 205 40 217 95
  • Pipe & Tubes Specification

    Carbon Steel, Alloy Steel, Low Temp, Pipe & Tubes Specification

    CHEMICAL ANALYSIS Mechnical Properties - SPECIFIC
    - - - - - - - - - - - - REQUIRE
    - - - - - - - - - Tensile Yield Elon- MENT
    - - - - - - - - - Strength Strength gation -
    Specification WT C% Mn% P% S% Si% Cr% Mo% Mpa Mpa 50mm -
    - - - - MAX MAX - - - - - MIN -
    - - - - - - - - - - - Longi- -
    - - - - - - - - - - - tudinal -
    ASTMA53/A AW 0.25MAX 0.95MAX 0.050 0.060 - - - 331MIN 207 MIN 36 Cr Mo
    ASTMA53/B AW 0.30MAX 1.20MAX 0.050 0.060 - - - 413MIN 240MIN 29.5 Cu Ni Va
    ASTMA 106/A AW 0.25MAX 0.27- 0.025 0.025 0.10MIN 0.40MAX 0.15MAX 330MIN 205MIN 35/28 0.40 0.15
    ASTMA 106/B AW 0.30MAX 0.93 0.025 0.025 0.10MIN 0.40MAX 0.15MAX 415MIN 240MIN 30/22 0.40 0.40
    ASTMA 106/C AW 0.35MAX 0.29 0.025 0.025 0.10MIN 0.40MAX 0.15MAX 485MIN 275MIN 30/22 0.08
    - - - 1.06 - - - - - - - - five
    - - - 0.29 - - - - - - - - elements
    - - - 1.06 - - - - - - - - not to
    - - - - - - - - - - - - exceed 1%
    ASTMA179 MW 0.06-018 0.27- 0.048 0.048 - - - 325MIN 180MIN 35.0 Hardness
    ASTMA214 MW 0.18MAX 0.63 0.050 0.050 - - - 385MIN 180MIN 35.0 72HRB
    ASTMA 192 MW 0.06-0.18 0.27 0.048 0.048 0.25MAX - - 325MIN 180MIN 35.0 MAX
    ASTMA 209/T1 MW 0.10-0.20 0.63 0.045 0.045 0.10- - 0.44- 380MIN 205MIN 30/22 Hardness
    ASTMA 209/T1a MW 0.15-0.25 0.27 0.045 0.045 0.50 - 0.65 365MIN 195MIN 30/22 72HRB
    ASTMA 209/T1B MW 0.14MAX 0.63 0.045 0.045 0.10- - 0.44- 415MIN 220MIN 30/22 MAX
    ASTMA 210/A-1 MW 0.27MAX 0.30 0.048 0.058 0.50 - 0.65 415MIN 255MIN 30/22 Hardness
    ASTMA210/C MW 0.35MAX 0.80 0.048 0.058 0.10- - 0.44 485MIN 275MIN 30/22 77HRB
    - - - 0.30 - - 0.50 - 0.65 - - - MAX
    - - - 0.80 - - 0.10MIN - - - - - Hardness
    - - - 0.30- - - 0.10MIN - - - - - 80HRB
    - - - 0.80 - - - - - - - - MAX
    - - - 0.93MAX - - - - - - - - Hardness
    - - - 0.29 - - - - - - - - 81HRB
    - - - 1.06 - - - - - - - - MAX
    - - - - - - - - - - - - Hardness
    - - - - - - - - - - - - 77HRB
    - - - - - - - - - - - - MAX
    - - - - - - - - - - - - Hardness
    - - - - - - - - - - - - 79HRB
    - - - - - - - - - - - - MAX
    - - - - - - - - - - - - Hardness
    - - - - - - - - - - - - 89HRB
    - - - - - - - - - - - - MAX
    ASTMA 213/T2 MW 0.10/0.20 0.30- 0.045 0.045 0.10 0.50- 0.44 415MIN 205MIN 30/22 Hardness
    ASTMA213/T5 MW 0.15MAX 0.61 0.030 0.030 0.30 0.81 0.65 415MIN 205MIN 30/22 85HRB
    ASTMA213/T11 MW 0.15MAX 0.30 0.030 0.030 0.50MAX 4.00 0.44 415MIN 205MIN 30/22 MAX
    ASTMA 213/T12 MW 0.15MAX 0.60 0.045 0.045 0.50 6.00 0.65 415MIN 220MIN 30/22 Hardness
    ASTMA 213/T22 MW 0.15MAX 0.30 0.030 0.030 1.00 1.00- 0.44- 415MIN 205MIN 30/22 85HRB
    - - - 0.60 - - 0.50MA> 1.50 0.65 - - - MAX
    - - - 0.30- - - 0.50MAX 0.80 0.44 - - - Hardness
    - - - 0.61 - - - 1.25 0.65 - - - 85HRB
    - - - 0.30 - - - 1.90 0.87 - - - MAX
    - - - 0.60 - - - 2.60 1.13 - - - Hardness
    - - - - - - - - - - - - 85HRB
    - - - - - - - - - - - - MAX
    - - - - - - - - - - - - Hardness
    - - - - - - - - - - - - 85HRB
    - - - - - - - - - - - - MAX
    ASTMA333/1 AW 0.30MAX 0.40 0.025 0.025 - - - 380MIN 205MIN 25/20 ImpactAS-
    ASTMA333/6 AW 0.30MAX 1.06 0.025 0.025 1.00MIN 0 - - 415MIN 240MIN 30/22 50F
    ASTMA 334/1 AW 0.30MAX 0.29 0.025 0.025 - - - 380MIN 205MIN 35/28 FOR
    ASTMA 334/6 AW 0.30MAX 1.06 0.025 0.025 0.10MIN - - 415MIN 240MIN 30/22 40X10J/18
    - - - 0.40- - - - - - - - - 14-50F
    - - - 1.06 - - - - - - - - 40X10J/18
    - - - 0.29- - - - - - - - - 14-90 HRB
    - - - - - - - - - - - - MAX
    ASTMA333/1 AW 0.30MAX 0.40 0.025 0.025 - - - 380MIN 205MIN 25/20 ImpactAS-
    ASTMA333/6 AW 0.30MAX 1.06 0.025 0.025 0.10MIN - - 415MIN 240MIN 30/22 50F
    ASTMA 334/1 AW 0.30MAX 0.29 0.025 0.025 - - - 380MIN 205MIN 35/28 FOR
    ASTMA334/6 AW 0.30MAX 1.06 0.025 0.025 0.10MIN - - 415MIN 240MIN 30/22 40X10J/18
    - - - 0.40- - - - - - - - - 14-50F
    - - - 1.06 - - - - - - - - 40X10J/18
    - - - 0.29 - - - - - - - - 14-90 HRE
    - - - 1.06 - - - - - - - - MAX
    ASTMA335/P1 AW 0.10-0.20 0.30- 0.025 0.025 0.10 - 0.44- 380MIN 205MIN 30/22 -
    ASTMA335/P2 AW 0.10-0.20 0.80 0.025 0.025 0.50 0.50 0.65 380MIN 205MIN 30/22 -
    ASTMA335/P5 AW 0.15MAX 0.30 0.025 0.025 0.10- 0.81 0.44- 415MIN 205MIN 30/22 -
    ASTMA335/P9 AW 0.15MAX 0.61 0.025 0.025 0.30 4.00- 0.65 415MIN 172MIN 30/22 -
    ASTMA335/P11 AW 0.15MAX 0.30 0.025 0.025 0.50MAX 6.00 0.45 415MIN 205MIN 30/22 -
    ASTMA335/P12 AW 0.15MAX 0.60 0.025 0.025 0.25- 8.00 0.65 415MIN 205MIN 50/22 -
    ASTMA335/P22 AW 0.15MAX 0.30 0.025 0.025 1.00 10.0 0.09 415MIN 205MIN 30/22 -
    - - - 0.60 - - 0.50- 1.00- 1.10 - - - -
    - - - 0.30- - - 1.00 1.50 0.44- - - - -
    - - - 0.60 - - 0.50MAX 0.80- 0.65 - - - -
    - - - 0.30- - - 0.50MAX 1.25 0.44- - - - -
    - - - 0.61 - - - 1.90 0.65 - - - -
    - - - 0.30- - - - 2.60 0.87- - - - -
    - - - 0.60 - - - - 1.13 - - - -
    BS/3059/1/33 - 0.15MAX 0.30 0.050 0.050 - - - 324-441 186MIN 25 -
    BS/3059/2/33 - 0.15MAX 0.70 0.050 0.050 0.10- - - 324-441 186MIN 21 -
    BS/3059/2/45 - 0.12-0.18 0.40- 0.035 0.035 0.35 - - 441-560 245MIN 22 -
    BS/3059/2/620 - 0.10-0.15 0.70 0.040 0.040 0.10 0.70- 0.45 441-618 235MIN 22 -
    - - - 0.90- - - 0.35 1.10 0.65 - - - -
    - - - 1.20 - - 0.10- - - - - - -
    - - - 0.40- - - 0.35 - - - - - -
    - - - 0.70 - - - - - - - - -
    DIN/17175/ST35.8 8 - 0.17MAX 0.40MIN 0.040 0.040 0.35MAX - - 340-441 235MIN 25 -
    DIN/17175/ST45.8 - 0.22MAX 0.45MIN 0.040 0.040 0.10- - - 441-540 255MIN 25 -
    DIN/17175/15MO3 - 0.12-0.20 0.50- 0.040 0.040 0.35 - 0.25 441-540 284MIN 21 -
    DIN/17175/13CrMO44 - 0.10-0.18 0.80 0.040 0.040 0.10 0.70- 0.35 441-570 294MIN 22 -
    DIN/17175/10CrM910 - 0.15MAX 0.40- 0.040 0.040 0.35 1.60 0.40- 441-570 294MIN 22 -
    - - - 0.70 - - 0.10- 2.0-2.5 0.50 - - - -
    - - - 0.40- - - 0.35 - 0.9-1.10 - - - -
    - - - 0.60 - - 0.15- - - - - - -
    - - - - - - 0.50 - - - - - -
    ASTMA 199/T5 MW 0.50-0.15 0.30- 0.030 0.030 0.50MAX 4.00- 0.45- 415MIN 170MIN 30/22 Hardness
    ASTMA 199/T11 MW 0.50-0.15 0.60 0.030 0.030 0.50- 6.00 0.65 415MIN 170MIN 30/22 85 HRB
    ASTMA 199/T22 MW 0.50-0.15 0.30- 0.030 0.030 1.00 1.00 0.44- 415MIN 170MIN 30/22 MAX
    ASTMA 199/T4 MW 0.15MAX 0.60 0.030 0.030 0.50MAX 1.50 0.65 415MIN 170MIN 30/22 Hardness
    ASTMA 199/T7 MW 0.15MAX 0.30 0.030 0.030 0.50- 1.90- 0.87- 415MIN 170MIN 30/22 85 HRB
    ASTMA 200/T5 MW 0.15MAX 0.60 0.030 0.030 1.00 2.60 1.13 415MIN 170MIN 30/22 MAX
    ASTMA 200/T11 MW 0.50-0.15 0.30- 0.030 0.030 0.50- 2.15- 0.44- 415MIN 170MIN 30/22 Hardness
    ASTMA 200/T22 MW 0.50-0.15 0.60 0.030 0.030 1.00 2.85 0.65 415MIN 170MIN 30/22 85 HRB
    ASTMA200/T4 MW 0.50-0.15 0.30- 0.030 0.030 0.50- 6.00- 0.45 415MIN 170MIN 30/22 MAX
    ASTMA 200/T7 MW 0.15MAX 0.60 0.030 0.030 1.00 8.00 0.65 415MIN 170MIN 30/22 Hardness
    ASTMA 199/T9 MW 0.15MAX 0.30- 0.030 0.030 0.50- 4.00- 0.45- 415MIN 170MIN 30/22 35 HRB
    - - - 0.60 - - 1.00 6.00 0.65 - - - MAX
    - - - 0.30- - - 0.50MAX 1.00- 0.44 - - - Hardness
    - - - 0.60 - - 0.50- 1.50 0.65 - - - 85 HRB
    - - - 0.30- - - 1.00 1.90- 0.87- - - - MAX
    - - - 0.60 - - 0.50- 2.60 1.13 - - - Hardness
    - - - 0.30- - - 1.00 2.15- 0.44 - - - 85 HRB
    - - - 0.60 - - 0.25- 2.85 0.65 - - - MAX
    - - - 0.30 - - 1.00 6.00- 0.45- - - - Hardness
    - - - 0.60 - - - 8.00 0.65 - - - 85 HRB
    - - - 0.30- - - - 8.00- 0.90- - - - MAX
    - - - 0.60 - - - 10.0 1.10 - - - Hardness
    - - - - - - - - - - - - 85 HRB
    - - - - - - - - - - - - MAX
    - - - - - - - - - - - - Hardness
    - - - - - - - - - - - - 85 HRB
    - - - - - - - - - - - - MAX
    - - - - - - - - - - - - Hardness
    - - - - - - - - - - - - 85 HRB
    - - - - - - - - - - - - MAX
    - - - - - - - - - - - - Hardness
    - - - - - - - - - - - - 85 HRB

    -

    Weight & Dimensions Of Schedule Pipe

    NOMINAL THICKNESS AND WEIGHTS OF STAINLSS STEEL PIPES (ANSI B 36.10)
    - Nominal Out Side - Schedule 5 Schedule 10 - Schedule 20 - Schedule - Schedule - - Schedule - Sch XXS
    Bore size inches Diameter Wall - Wall - Wall - Wall 40 Wall 80 - Wall 160 Wall -
    mm - mm - kg/ - kg/ - Kg/ - Kg/ - - Kg/Mtr - Kg/ - Kg/
    - - - mm Mtr mm mtr mm Mtr mm Mtr - - - mm Mtr mm Mtr
    - 1/8" 10.3 - - 1.24 0.278 - - 1.73 0.370 2.14 - 0.470 - - - -
    6 1/4" 13.72 - - 1.65 0.499 - - 2.24 0.645 3.02 - 0.804 - - - -
    10 3/8" 17.15 - - 1.65 0.640 - - 2.31 0.858 3.20 - 1.117 - - - -
    15 1/2" 21.34 1.65 0.873 2.11 1.016 - - 2.77 1,288 3.73 - 1.640 4.75 1.93 7.47 2.56
    20 1/4" 26.67 1.65 1.030 2.11 1.300 - - 2.87 1.714 3.91 - 2,230 5.5 2.89 7.82 3.65
    25 1" 33.4 1.65 1.310 2.77 2.120 - - 3.38 2.540 4.55 - 3.290 6.35 4.24 9.09 5.48
    32 11/4" 42.16 1.65 1.670 2.77 2.730 - - 3.56 3.440 4.85 - 4.540 6.35 5.61 9.70 7.84
    40 11/2" 48.26 1.65 1.910 2.77 3.150 - - 3.68 4.110 5.08 - 5.490 7.14 7.25 10.16 9.6
    50 2" 60.30 1.65 2.410 2.77 4.000 - - 3.91 5,520 5.54 - 7,590 8.71 11.1 11.07 13.5
    65 21/2" 73.90 2.11 3.750 3.05 5.340 - - 5.49 8.770 7.01 - 11.570 9.53 14.9 14.02 20.51
    80 3 88.90 2.11 4.590 3.05 6.550 - - 5.74 11.450 7.62 - 15.480 11.1 21.3 15.24 27.83
    - 31/2 101.6 2.11 5.200 3.05 7.450 - - 6.02 13.64 8.08 - 18.730 - - 16.15 34.22
    100 4" 114.30 2.11 5.860 3.05 8.490 - - 6.55 15,680 8.56 - 23,150 13.49 33.6 17.2 41.25
    125 5' 141.30 2.77 9.600 3.40 11.700 - - 7.11 22.090 9.53 - 31,000 15.88 49.2 19.05 57.85
    150 6' 168.3 2.77 11.500 3.40 14.000 - - 8.18 28.650 11.0 - 42.700 18.26 68.53 21.9 79.5
    200 8' 219.18 2.77 15.000 3.76 20.300 6.35 33.50 9.27 43,300 12.7 - 64,600 23.01 112.97 22.23 108.56
    250 10" 273.05 3.40 23.000 4.19 28.300 6.35 42.00 9.53 61,400 12.70 - 82.80 28.56 174.95 25.40 156.0
    300 12" 323.85 3.96 31,800 4.57 36,600 6.35 50.48 9.53 75,010 12.70 - 98.95 33.32 242.40 25.40 187.0
    350 14" 355.60 3.96 34.900 4.78 42.100 7.92 68.28 9.53 82.58 12.70 - 109.04 35.71 286.04 - -
    400 16" 406.44 4.19 42.300 4.78 48.200 7.92 78.26 9.53 94.70 12.70 - 125.20 40.49 370.74 - -
    450 18" 457.20 4.19 47,600 4.78 54.300 7.92 88.23 9.53 106.83 12.70 - 141.35 45.24 466.67 - -
    500 20" 508.00 4.78 60.400 5.54 69,900 9.53 117.79 9.53 181.93 12.70 - 157.51 50.01 573.31 - -
    550 22" 558.80 4.78 66,150 5.54 76,580 9.53 129.80 9.53 131.07 12.70 - 173.66 53.98 682.57 - -
    600 24" 609.60 5.54 83,630 6.35 95.770 9.53 141.80 9.53 143.20 12.70 - 189.82 59.54 819.70 - -
    650 26" 660.40 - - 7.92 127.64 12.70 203.17 9.53 153.20 12.70 - 203.17 - - - -
    700 28" 711.20 - - 7.92 137.57 12.70 219.11 9.53 165.16 12.70 - 219.11 - - - -
    750 30" 762.00 - - 7.92 147.51 12.70 235.04 9.53 177.82 12.70 - 235.98 - - - -
    800 32" 812.80 - - 7.92 157.45 12.70 250.98 9.53 189.08 12.70 - 250.98 - - - -
    850 34" 863.60 - - 7.92 167.39 12.70 266.91 9.53 201.04 12.70 - 266.91 - - - -
    900 36" 914.40 - - 7.92 117.32 12.70 282.85 9.53 212.99 12.70 - 282.850 - - - -
    - 42" 1066.80 - - - - - - 9.53 248.87 12.70 - 330.66 - - - -
    - 48" 1219.00 - - - - - - 9.53 284.69 12.70 - 378.40 - - - -

    -

    -

    Line Pipe Weight

    Nominal - Ou Sch Sch Sche Sche Stan Sched Extra Sche sche Sche Sche Sche Sche Do
    Pipe - tside *5 *10 dule dule dard ule Str dule dule dule dule dule dule uble
    Size - Diam - - 20 30 weig 40 ong 60 80 100 120 140 160 Ex.
    - - eter - - - - ht - - - - - - - Str.
    mm in mm Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m Kg/m
    8 1/4 13.7 - 0.491 - - 0.63 0.63 0.80 - 0.80 - - - -
    - - - - - - - - - - -- - - - -- --
    10 3/8 17.1 - 0.631 - - 0.84 0.84 1.10 - 1.10 - - - -
    - - - - - -- - - - - - - - - -- --
    15 1/2 21.3 0.801 0.999 - - 1.27 1.27 1.62 - 1.62 - - 1.95 2.55
    - - - - - - -- - - - - - - - - -
    20 3/4 26.7 1.020 1.280 - - 1.69 1.69 2.19 - 2.19 - - 2.90 3.63
    - - - - - - -- - - - - - - - - -
    25 1 33.4 1.290 2.090 -- - 2.50 2.50 3.23 - 3.23 - - - 4.23 5.45
    32 11/4 42.2 1.650 2.69 - - 3.38 3.38 4.47 - 4.47 - - 5.60 7.76
    - - - - - - -- - - - - - - - - -
    40 11/2 48.3 1.900 3.11 - - 4.05 4.05 5.41 - 5.41 - - 7.24 9.55
    - - - - - -- -- - - - - - - - - -
    50 2 60.3 3,340 3.92 - - 5.44 5.44 7.48 - 7.48 - - 11.11 13.45
    - - - - - - -- - - - - - -- - - -
    65 21/2 73.0 3,690 5.26 - - 8.62 8.62 11.41 - 11.41 - - 14.91 20.39
    - - - - - -- -- - - - - - - - - -
    80 3 88.9 4.510 6.45 - - 11.29 11.29 15.27 - 15.27 - - 21.33 27.67
    - - - - - -- - - - - - - - -- - -
    90 31/2 101.6 5.180 7.41 - - 13.57 13.57 18.63 - 18.63 -- -- - -- -
    100 4 114.3 5,940 8.38 - - 16.07 16.07 22.31 - 22.31 28.30 - 33.53 41.02
    - - - - - - - - - - - - - -- - -
    125 5 141.3 9,340 11.60 - - 21.78 21.78 30.95 - 30.95 40.28 - 49.09 57.42
    - - - - - - - - - - - - - -- - -
    150 6 168.3 11.30 13.80 - - 28.26 28.26 42.56 - 42.56 54.20 - 67.55 79.18
    - - - - - - - - - - - -- - - - -
    200 8 219.1 14.80 20.00 33.31 36.79 42.53 42.53 64.63 53.09 75.89 64.63 90.43 100.93 111.25 107.87
    350 10 273.1 22.60 27.80 41.77 51.00 60.29 60.29 81.55 81.54 114.70 95.97 133.00 155.10 172.25 155.10
    300 12 323.9 31.24 35.99 49.72 65.20 73.82 79.72 97.44 108.96 159.85 132.01 186.92 208.04 238.72 186.92
    350 14 355.6 34.34 54.68 67.94 81.28 81.28 - 107.38 126.68 158.08 224.60 253.53 281.68 -
    - - - - - - - - 94.49 - - 194.90 - - - -
    400 16 406.4 41.56 62.63 77.86 93.21 93.21 123.29 123.29 160.12 203.48 245.50 286.62 333.11 365.39 -
    450 18 457 46.80 70.59 87.79 122.36 105.14 155.91 139.19 205.80 254.59 309.76 363.65 408.45 459.51 --
    500 20 508 59.32 78.84 177.07 155.10 117.07 183.37 155.01 247.85 - - - - -
    550 22 559 65.30 86.50 129.01 171.01 129.01 -- 171.01 - - - - - -
    600 24 610 82.52 94.45 140.94 209.54 140.94 255.14 186.92 355.02 - - - - -
    650 26 660 -- 127.50 202.83 - 152.87 - 202.83 - - - - - -
    700 28 711 - 137.42 218.73 272.18 164.80 - 218.73 - - - - - -
    750 30 762 118.33 147.36 234.64 292.06 176.73 - 236.64 - - - - - -
    800 32 813 -- 152.28 250.55 311.95 188.66 342.70 250.55 - - - - - -
    850 34 864 -- 167.20 266.46 331.83 200.59 364.58 266.46 - - - - - -
    900 36 914 - 177.13 282.36 351.72 212.52 420.52 282.36 - - - - - -

    -

    -

    -

  • Flanges Dimensions

    150 LB. FLANGES

    Normal
    pipe
    size    		 Outside
    dia. of
    flange    		 Minimum
    thickness
    of flange    		 Overall Length Bolt 
    Circle    		 No. and
    Size of
    Holes    		 O.D. of
    raised
    face
    Welding
    neck    		 Slip-on
    & socket
    welding    		 Lap Joint
      O Q Y     Diam. No. dia. R
    1/2 89 11.2 47.6 15.9 15.9 60.5 4 15 35
    3/4 117 15.9 57.2 25.4 25.4 82.5 4 15 43
    1 108 14.3 55.6 17.5 17.5 79.5 4 15 51
    1.1/4 117 15.9 57.2 20.6 20.6 89.0 4 15 64
    1.1/2 127 17.5 61.9 22.2 22.2 98.5 4 15 73
    2 152 19.1 63.5 25.4 25.4 120.5 4 19 92
    2.1/2 178 22.3 69.8 28.6 28.6 139.5 4 19 105
    3 190 23.9 69.8 30.2 30.2 152.5 4 19 127
    3.1/2 216 23.9 71.4 31.8 31.8 178.0 8 19 140
    4 229 23.9 86.2 33.3 33.3 190.5 8 19 157
    5 254 23.9 88.9 36.5 36.5 216.0 8 22 186
    6 279 25.4 88.9 39.7 39.7 241.5 8 22 216
    8 343 28.6 101.6 44.4 44.4 298.5 8 22 270
    10 406 30.2 101.6 49.2 49.2 362.0 12 25 324
    12 483 31.8 114.3 55.6 55.6 432.0 12 25 381
    14 533 35.0 127.0 57.2 79.4 476.0 12 29 413
    16 597 36.6 127.0 63.5 87.3 539.5 16 29 470
    18 635 39.7 139.7 68.3 96.8 578.0 16 32 533
    20 698 42.9 144.5 73.0 103.2 635.0 20 32 584
    24 813 47.7 152.4 82.6 111.1 749.5 20 35 692

    300 LB. FLANGES

    Normal
    pipe
    size    		 Outside
    dia. of
    flange    		 Minimum
    thickness
    of flange    		 Overall Length Bolt 
    Circle    		 No. and
    Size of
    Holes    		 O.D. of
    raised
    face
    Welding
    neck    		 Slip-on
    & socket
    welding    		 Lap Joint
      O Q Y Diam. No. dia. R
    1/2 95 14.3 52.4 22.2 22.2 666.5 4 15 35
    3/4 117 15.9 57.2 25.4 25.4 82.4 4 19 43
    1 124 17.5 61.9 27.0 27.0 89.0 4 19 51
    1-1/4 133 19.1 65.1 27.0 27.0 98.5 4 19 64
    1-1/2 156 20.7 68.3 30.2 30.2 114.5 4 22 73
    2 165 22.3 69.8 33.3 33.3 127.0 8 19 92
    2-1/2 190 25.4 76.2 38.1 38.1 149.0 8 22 105
    3 210 28.6 79.4 42.9 42.9 168.0 8 22 127
    4 254 318 85.7 47.6 47.6 200.0 8 22 157
    5 279 35.0 98.4 50.8 50.8 235.0 8 22 186
    6 313 36.6 98.4 52.4 52.4 270.0 12 22 216
    6 381 413 111.1 61.9 91.9 330.0 12 25 270
    10 444 47.7 117.5 66.7 95.3 387.5 16 29 324
    12 521 50.8 130.2 73.0 101.6 451.0 16 32 381
    14 584 54.0 142.9 76.2 111.1 514.5 20 32 413
    16 648 57.2 146.0 82.6 120.7 571.5 20 35 470
    18 711 60.4 158.8 88.9 130.2 628.5 24 35 533
    20 775 63.5 161.9 95.2 139.7 686.0 24 35 584
    24 914 69.9 168.3 106.4 152.4 843.0 24 41 692

    600 LB. FLANGES

    Normal
    pipe
    size    		 Outside
    dia. of
    flange    		 Minimum
    thickness
    of flange    		 Overall Length Bolt 
    Circle    		 No. and
    Size of
    Holes    		 O.D. of
    raised
    face
    Welding
    neck    		 Slip-on
    & socket
    welding    		 Lap Joint
      O Q Y Diam. No. dia. R
    1/2 95 14.3 52.4 22.2 22.2 66.5 4 15 35
    3/4 117 15.9 57.2 25.4 25.4 82.5 4 19 43
    1 124 17.5 61.9 27.0 27.0 89.0 4 19 51
    1-1/4 133 20.7 66.7 28.6 28.6 98.5 4 19 64
    1-1/2 156 22.3 69.8 31.8 31.8 114.5 4 22 73
    2 165 25.4 73.0 36.5 36.5 127.0 8 19 92
    2-1/2 190 28.6 79.4 41.3 41.3 149.0 8 22 105
    3 210 31.8 82.6 46.0 46.0 168.0 8 22 127
    3-1/2 229 35.0 85.7 49.2 49.2 184.0 8 25 140
    4 273 38.1 101.6 54.0 54.0 216.0 8 25 157
    5 330 44.5 114.3 60.3 60.3 266.5 8 29 186
    6 356 47.7 117.5 66.7 66.7 292.0 12 29 216
    8 419 55.6 133.4 76.2 76.2 349.0 12 32 270
    10 508 63.5 152.4 85.7 115.1 432.0 16 85 324
    12 559 66.7 155.6 92.1 111.1 489.0 20 35 381
    14 603 69.9 165.1 93.7 117.5 527.0 20 38 413
    16 686 76.2 177.8 106.4 127.0 603.0 20 41 470
    18 743 82.6 184.2 117.6 139.7 654.0 20 45 533
    20 813 88.9 190.5 127.0 165.1 724.0 24 45 584
    24 940 101.6 203.2 139.7 184.2 838.0 24 51 692

    900 LB. FLANGES

    Normal
    pipe
    size    		 Outside
    dia. of
    flange    		 Minimum
    thickness
    of flange    		 Overall Length Bolt 
    Circle    		 No. and
    Size of
    Holes    		 O.D. of
    raised
    face
    Welding
    neck    		 Slip-on
    & socket
    welding    		 Lap Joint
      O Q Y Diam. No. dia. R
    1/2 121 22.3 60.3 31.8 31.8 82.5 4 22 35
    3/4 130 25.4 69.8 34.9 34.9 89.0 4 22 43
    1 149 28.6 78.0 41.3 41.3 101.5 4 25 51
    1-1/4 159 28.6 78.0 41.3 41.3 111.0 4 25 64
    1-1/2 178 31.8 82.6 44.4 44.4 124.0 4 29 78
    2 216 38.1 101.6 57.2 57.2 165.0 8 25 92
    2-1/2 244 41.3 104.8 63.5 63.5 190.5 8 29 105
    8 241 38.1 101.6 54.0 54.0 190.5 8 25 127
    3-1/2
    4 292 44.5 114.3 69.8 69.8 235.0 8 32 157
    5 349 50.8 127.0 79.4 79.4 279.5 8 35 186
    6 381 55.6 189.7 85.7 85.7 317.5 12 32 216
    8 470 68.5 161.9 101.8 114.3 393.5 12 38 270
    10 546 69.9 184.2 108.0 127.0 470.0 16 38 324
    12 610 79.4 200.0 117.5 142.9 533.5 20 38 381
    14 584 54.0 142.9 76.2 111.1 514.5 20 32 413
    16 711 60.4 158.8 88.9 130.2 628.5 24 35 533
    20 775 63.5 161.9 95.2 139.7 686.0 24 35 584
    24 914 69.9 168.3 106.4 152.4 843.0 24 41 692

    1500 LB. FLANGES

    Normal
    pipe
    size    		 Outside
    dia. of
    flange    		 Minimum
    thickness
    of flange    		 Overall Length Bolt 
    Circle    		 No. and
    Size of
    Holes    		 O.D. of
    raised
    face
    Welding
    neck    		 Slip-on
    & socket
    welding    		 Lap Joint
      O Q Y Diam. No. dia. R
    1/2 12.1 22.3 60.3 31.8 31.8 82.5 4 22 35
    3/4 130 25.4 69.8 34.9 34.9 89.0 4 22 43
    1 149 28.6 73.0 41.3 41.3 101.5 4 25 51
    1-1/4 159 28.6 73.0 41.3 41.3 111.0 4 25 64
    1-1/2 178 31.8 82.6 44.4 44.4 124.0 4 29 73
    2 216 38.1 101.6 57.2 57.2 165.0 8 25 92
    2-1/2 244 41.3 104.8 63.5 63.5 190.5 8 29 105
    3 267 47.7 117.5 73.0 73.0 203.0 8 32 127
    3-1/2
    4 311 54.0 123.8 90.5 90.5 241.5 8 35 157
    5 375 73.1 155.5 104.8 104.8 292.0 8 41 186
    6 394 82.6 171.4 119.1 119.1 317.5 12 38 216
    8 483 92.1 212.7 142.9 142.9 393.5 12 45 270
    10 584 108.0 254.0 158.8 177.8 482.5 12 51 324
    12 673 123.9 282.9 181.0 219.1 571.5 16 54 381
    14 749 133.4 298.4 ----- 241.3 635.0 16 60 413
    16 826 146.1 311.2 ----- 260.4 705.0 16 51 470
    18 914 162.0 327.0 ------ 276.2 474.5 16 73 538
    20 984 117.8 355.4 ----- 292.1 832.0 16 80 584
    24 1168 203.2 406.4 ----- 330.2 990.5 16 92 692

    2500 LB. FLANGES

    Normal
    pipe
    size    		 Outside
    dia. of
    flange    		 Minimum
    thickness
    of flange    		 Overall Length Bolt 
    Circle    		 No. and
    Size of
    Holes    		 O.D. of
    raised
    face
    Welding
    neck    		 Slip-on
    & socket
    welding    		 Lap Joint
      O Q Y Diam. No. dia. R
    1/2 133.4 30.2 73.0 39.7 39.7 88.9 4 22 34.9
    3/4 139.7 31.8 79.4 42.9 42.9 95.3 4 22 42.9
    1 158.8 34.9 88.9 47.6 47.6 108.0 4 25 50.8
    1-1/4 184.2 38.1 95.3 52.4 52.4 130.2 4 29 63.5
    1-1/2 203.2 44.5 111.1 60.3 60.3 146.0 4 32 73.0
    2 235.0 50.8 127.0 69.9 69.9 171.5 8 29 92.1
    2-1/2 266.7 57.2 142.9 79.4 79.4 196.9 8 32 104.8
    3 304.8 66.7 168.3 92.1 92.1 228.6 8 35 127.0
    3-1/2
    4 355.6 76.2 190.5 108.0 108.0 273.0 8 41 157.2
    5 419.1 92.1 228.6 130.2 130.2 323.9 8 48 185.7
    6 482.6 108.0 273.1 152.4 152.4 268.3 8 54 215.9
    8 552.5 127.0 317.5 177.8 177.8 438.2 12 54 269.9
    10 673.1 165.1 419.1 228.6 228.6 539.8 12 67 323.9
    12 762.0 184.2 463.6 254.0 254.0 619.1 12 73 381.03
    14 --- --- --- --- --- --- -- --- ---
    16 --- --- --- --- --- --- -- --- ---
    18 --- --- --- --- --- --- -- --- --
    20 --- --- --- --- --- --- -- --- --
    24 --- --- --- --- --- --- -- --- --

    Welding Neck Flange Bores

    NOMINAL BORE
    Sch Sch Sch STD Sch Sch EXT Sch Sch Sch Sch Sch XX
    Nom Pipe Size OD 10 20 30 Wall 40 60 Hvy 80 100 120 140 160 Hvy
    ½ 0.84 0.674 ……. ……. 0.622 0.622 ……. 0.546 0.546 ……. ……. ……. 0.464 0.252
    ¾ 1.05 0.884 ……. ……. 0.824 0.824 ……. 0.742 0.742 ……. ……. ……. 0.612 0.434
    1 1.315 1.097 ……. ……. 1.049 1.049 ……. 0.957 0.957 ……. ……. ……. 0.815 0.599
    1 ¼ 1.66 1.442 ……. ……. 1.38 1.38 ……. 1.278 1.278 ……. ……. ……. 1.16 0.896
    1 ½ 1.9 1.682 ……. ……. 1.61 1.61 ……. 1.5 1.5 ……. ……. ……. 1.338 1.1
    2 2.375 2.157 ……. ……. 2.067 2.067 ……. 1.939 1.939 ……. ……. ……. 1.687 1.503
    2 ½ 2.875 2.635 ……. ……. 2.469 2.469 ……. 2.323 2.323 ……. ……. ……. 2.125 1.771
    3 3.5 3.26 ……. ……. 3.068 3.068 ……. 2.9 2.9 ……. ……. ……. 2.624 2.3
    3 ½ 4 3.76 ……. ……. 3.548 3.548 ……. 3.364 3.364 ……. ……. ……. ……. 2.728
    4 4.5 4.26 ……. ……. 4.026 4.026 ……. 3.826 3.826 ……. 3.624 ……. 3.438 3.152
    5 5.563 5.295 ……. ……. 5.047 5.047 ……. 4.813 4.813 ……. 4.563 ……. 4.313 4.063
    6 6.625 6.357 ……. ……. 6.065 6.065 ……. 5.761 5.761 ……. 5.501 ……. 5.187 4.897
    8 8.625 8.329 8.125 8.071 7.981 7.981 7.813 7.625 7.625 7.437 7.187 7.001 6.813 6.875
    10 10.75 10.42 10.25 10.136 10.02 10.02 9.75 9.75 9.562 9.312 9.062 8.75 8.5 8.75
    12 12.75 12.39 12.25 12.09 12 11.938 11.626 11.75 11.374 11.062 10.75 10.5 10.126 10.75
    14 14 13.5 13.376 13.25 13.25 13.124 12.812 13 12.5 12.124 11.812 11.5 11.188 …….
    16 16 15.5 15.376 15.25 15.25 15 14.688 15 14.312 13.938 13.562 13.124 12.812 …….
    18 18 17.5 17.376 17.124 17.25 16.876 16.5 17 16.124 15.688 15.25 14.876 14.438 …….
    20 20 19.5 19.25 19 19.25 18.812 18.376 19 17.938 17.438 17 16.5 16.062 …….
    22 22 21.5 ……. ……. 21.25 ……. ……. 21 ……. ……. ……. ……. ……. …….
    24 24 23.5 23.25 22.876 23.25 22.624 22.062 23 21.562 20.938 20.376 19.876 19.312 …….
    26 26 ……. ……. ……. 25.25 ……. ……. 25 ……. ……. ……. ……. ……. …….
    30 30 29.376 29 28.75 29.25 ……. ……. 29 ……. ……. ……. ……. ……. …….
    36 36 35.376 35 34.75 35.25 34.5 ……. 35 ……. ……. ……. ……. ……. …….
    40 40 ……. ……. ……. 39.25 ……. ……. 39 ……. ……. ……. ……. ……. …….
    42 42 ……. ……. ……. 41.25 ……. ……. 41 ……. ……. ……. ……. ……. …….
    48 48 ……. ……. ……. 47.25 ……. ……. 47 ……. ……. ……. ……. ……. …….

    DIN 2527

    NW D Flange k Raised Face Number Bolts Bolts Dia. of
    Bolt
    Hole    		 Weight of
    One Flange
    (7.85 kg/dm3)
    b d4 f d2 Type-B
    kg    		 Type-C
    kg
    ND-6 10
    15
    20     		75
    80
    90     		12
    12
    14     		50
    55
    65     		35
    40
    50     		2
    2
    2     		4
    4
    4     		M10
    M10
    M10    		 -
    -
    -     		11.5
    11.5
    11.5     		0.38
    0.44
    0.65     		0.33
    0.38
    0.59
    25
    32
    40     		100
    120
    130     		14
    14
    14    		 75
    90
    100    		 60
    70
    80     		2
    2
    3     		4
    4
    4     		M10
    M12
    M12    		 -
    (1/2")
    (1/2")     		11.5
    14.0
    14.0     		0.82
    1.17
    1.39     		0.74
    1.07
    1.21
    50
    65
    80     		140
    160
    190     		14
    14
    16     		110
    130
    150     		90
    110
    128     		3
    3
    3     		4
    4
    4     		M12
    M12
    M16    		 (1/2")
    (1/2")
    (3/8")     		14
    14
    18     		1.62
    2.44
    3.43     		1.43
    2.21
    3.09
    100
    125
    150     		210
    240
    265     		16
    18
    18     		170
    200
    225     		148
    178
    202     		3
    3
    3     		4
    8
    8     		M16
    M16
    M16     		(5/8")
    (5/8")
    (5/8")    		 18
    18
    18     		4.76
    6.11
    7.51     		4.37
    5.68
    7.02
    (175)
    200
    250     		295
    320
    375     		20
    20
    22     		255
    280
    335     		232
    258
    312     		3
    3
    3     		8
    8
    12     		M16
    M16
    M16     		(5/8")
    (5/8")
    (5/8")     		18
    18
    18     		10.4
    12.3
    18.3     		9.85
    11.7
    17.6
    300
    350
    400
    500     		440
    490
    540
    645     		22
    22
    22
    24     		395
    445
    495
    600     		365
    415
    465
    570    		 4
    4
    4
    4     		12
    12
    16
    20     		M20
    M20
    M20
    M20     		(3/4")
    (3/4")
    (3/4")
    (3/4")    		 23
    23
    23
    23     		25.3
    31.6
    38.4
    60.4     		24.0
    30.1
    36.4
    58.1
    ND-10
    (Note from 10 mm to 175 mm see ND-16    		 200
    250
    300     		340
    395
    445     		24
    26
    26     		295
    350
    400     		268
    320
    370     		3
    3
    4     		8
    12
    12     		M20
    M20
    M20     		(3/4")
    (3/4")
    (3/4")     		23
    23
    23     		16.5
    24.0
    30.9     		15.6
    23.1
    29.4
    350
    400
    500     		505
    565
    670     		26
    26
    28     		460
    515
    620     		430
    482
    585     		4
    4
    4     		16
    16
    20     		M20
    M24
    M24     		(3/4")
    (3/4")
    (3/4")     		23
    27
    27     		40.6
    49.4
    75.0     		38.0
    47.5
    72.7
    ND-16
    Note : For DIN 2527 ND-10-4 Holes    		 10
    15
    20     		90
    95
    105     		14
    14
    16     		60
    65
    75     		40
    45
    58     		2
    2
    2     		4
    4
    4     		M12
    M12
    M12     		(1/2")
    (1/2")
    (1/2")     		14
    14
    14     		0.63
    0.72
    1.01     		0.56
    0.64
    0.93
    25
    32
    40     		115
    140
    150     		14
    14
    16     		60
    65
    75     		40
    45
    58     		2
    2
    2     		4
    4
    4     		M12
    M16
    M16     		(1/2")
    (5/8")
    (5/8")     		14
    18
    18     		1.23
    1.80
    2.09     		1.13
    1.66
    1.85
    50
    65
    80     		165
    185
    200     		18
    18
    20     		125
    145
    160     		102
    122
    138     		3
    3
    3     		4
    4
    4/8     		M16
    M16
    M16     		(5/8")
    (5/8")
    (5/8")     		18
    18
    18     		2.88
    3.66
    4.77     		2.59
    3.33
    4.34
    100
    125
    150     		220
    250
    285     		20
    22
    22    		 180
    210
    240    		 158
    188
    212     		3
    3
    3     		8
    8
    8     		M16
    M16
    M16     		(5/8")
    (5/8")
    (5/8")     		18
    18
    18     		2.88
    3.66
    4.77     		2.59
    3.33
    4.34
    100
    125
    150     		220
    250
    285     		20
    22
    22     		180
    210
    240     		158
    188
    212     		3
    3
    3     		8
    8
    8     		M16
    M16
    M20     		(5/8")
    (5/8")
    (3/4")     		18
    18
    23     		5.65
    8.42
    10.4     		5.26
    7.67
    9.85
    (175)
    200
    250     		315
    340
    405     		24
    24
    26     		270
    295
    355     		242
    268
    320     		3
    3
    3     		8
    12
    12     		M20
    M20
    M20     		(3/4")
    (3/4")
    (7/8")    		 23
    23
    27     		14.0
    16.1
    24.9     		13.5
    15.6
    23.9
    300
    350
    400     		460
    520
    580     		28
    30
    32     		410
    470
    525     		378
    438
    490     		4
    4
    4     		12
    16
    16     		M24
    M24
    M27     		(7/8")
    (7/8")
    (1")    		 27
    27
    30     		35.1
    47.8
    63.5     		33.6
    46.2
    61.5
    500 715 34 650 610 4 20 M30 (1-1/8") 33 102 99.5
    ND-25
    Note: From 10mm to 150 mm
    see ND-40
    		(175)
    200
    250     		330
    360
    425     		28
    30
    32     		280
    310
    370     		248
    278
    335     		3
    3
    3     		12
    12
    12     		M24
    M24
    M24     		(7/8")
    (7/8")
    (1")    		 27
    27
    30     		17.3
    22.3
    33.5     		16.5
    21.5
    32.5
    300
    350
    400     		485
    555
    620     		34
    38
    40     		430
    490
    550     		395
    450
    505     		4
    4
    4     		16
    16
    16     		M27
    M30
    M33     		(1")
    (1-1/8")
    (1- 1/4")    		 30
    33
    36     		46.3
    68.0
    89.7     		44.7
    65.9
    87.0
    500 730 44 660 615 4 20 M33 (1-1/4") 36 138 134
    ND-40 10
    15
    20     		90
    95
    105     		16
    16
    16     		60
    65
    75     		40
    45
    58     		2
    2
    2     		4
    4
    4

    M12
    M12
    M12

    		(1/2")
    (1/2")
    (1/2")     		14
    14
    14     		0.72
    0.81
    1.24     		0.62
    0.74
    1.05
    25
    32
    40     		115
    140
    150     		18
    18
    18     		85
    100
    110     		68
    78
    88     		2
    2
    2     		4
    4
    4     		M12
    M12
    M12     		(1/2")
    (5/8")
    (5/8")     		14
    18
    18     		1.38
    2.03
    2.35     		1.31
    1.82
    2.11
    50
    65
    80     		165
    185
    200     		20
    22
    24     		125
    145
    160     		102
    122
    138     		3
    3
    3     		4
    8
    8     		M16
    M16
    M16     		(5/8")
    (5/8")
    (5/8")     		18
    18
    18     		3.20
    4.29
    5.88     		2.91
    4.13
    5.21
    100
    125
    150     		235
    270
    300     		24
    26
    28     		190
    220
    250     		162
    188
    218     		3
    3
    3     		8
    8
    8     		M20
    M24
    M24     		(3/4")
    (7/8")
    (7/8")     		23
    27
    27     		7.54
    10.8
    14.5     		7.08
    10.4
    13.9
    175
    200
    250     		350
    375
    450     		32
    34
    38     		295
    320
    385     		260
    285
    345     		3
    3
    3     		12
    12
    12     		M27
    M27
    M27     		(1")
    (1")
    (1-1/8")     		30
    30
    30     		22.1
    27.2
    43.8     		21.3
    26.2
    43.1
    300
    350
    400     		515
    580
    660     		42
    46
    50     		450
    510
    585     		410
    465
    535     		4
    4
    4     		16
    16
    16     		M30
    M33
    M36     		(1-1/8")
    (1-1/8")
    (1-1/8")     		33
    36
    39     		63.3
    89.5
    127     		62.2
    87.2
    124
    500 755 52 670 615 4 20 M39 (1-1/2") 42 172 168

    DIN 2576 FLANGES

    Pipe Flange
    		Bolts Weight of
    one flange
    7.85 kg/
    dm3) kg
    NW d1 ds D b1 k Number Thread d2
    10 14
    17.2)     		14.5
    17.7     		90 14 60 4 M12 (1/2") 14 0.613
    0.605
    15 20
    21.3)     		20.5
    21.8     		95 14 65 4 M12 (1/2") 14 0675
    0.669
    20 25
    26.9)     		25.5
    27.4     		105 16 75 4 M12 (1/2") 14 0.947
    0.936
    25 30
    33.7)     		30.5
    34.2     		115 16 85 4 M12 (1/2") 14 1.14
    1.11
    32 38
    42.4)    		 38.5
    42.9     		140 16 100 4 M16 (5/8") 18 1.66
    1.62
    40 44.5
    48.3)     		45
    48.8     		150 16 110 4 M16 (5/8") 18 1.89
    1.86
    50 57
    60.3)     		57.5
    60.8     		165 18 125 4 M16 (5/8") 18 2.51
    2.47
    65 76.1) 76.6 185 18 145 4 M16 (5/8") 18 3.00
    80 88.9) 89.4 200 20 160 4 M16 (5/8") 18 3.79
    100 108
    114.3)     		108.5
    114.8     		220 20 180 8 M16 (5/8") 18 4.20
    4.03
    125 133
    139.7)     		133.5
    140.2     		250 22 210 8 M16 (5/8") 18 5.71
    5.46
    150 159
    168.3)     		159.5
    168.8     		285 22 210 8 M16 (3/4") 23 6.72
    6.57
    175 191
    193.7)     		192
    194.7     		315 24 270 8 M20 (3/4") 23 8.60
    8.45
    200 216
    219.1)     		216
    220.1    		 340 24 295 8 M20 (3/4") 23 9.50
    9.31
    250 267
    273)     		268
    274     		395 26 350 12 M20 (3/4") 23 12.5
    11.9
    400 406.4
    419     		407.4
    420     		565 32 515 16 M24 (7/8") 27 27.9
    25.9
    500 508)
    521     		509
    522     		670 38 620 20 M24 (7/8") 27 37.9
    41.1

    DIN 2632 WELDING NECK FLANGES FOR NOMINAL PRESSURE 10

    Pipe Flange Neck Raised
    face     		Bolts
    		Weight of
    one flange
    7.85 kg/dm3)
    kg
    NW d1 D b k h1 d3 s f h2 d4 f No. Thread d2
    200 216 340 24 295 62 232 5.9 10 16 268 3 8 M20 (3/4") 23 11.3
    219.1 235
    250 267 395 26 350 68 285 6.3 12 16 320 3 12 14.7
    273 295
    300 318 445 26 400 68 335 7.1 12 16 370 4 17.6
    323.9 344
    350 355.6 505 26 460 68 385 7.1 12 16 430 4 16 M24 (3/8") 27
    368 21.4
    400 406.4 565 26 515 72 440 7.1 12 16 482 4
    419 26.1
    500 508 670 28 620 75 542 7.1 12 16 585 4 20
    521 34.7
    600 609.6 780 28 725 80 642 7.1 12 18 685 5 M27 (1") 30
    622 42.2

    DIN 2633 WELDING NECK FLANGES NOMINAL PRESSURE 16

    Pipe Flange Neck Raised
    face     		Bolts Weight of
    one flange
    7.85 kg/dm3)
    kg
    NW d1 D b k h1 d3 s r h2 d4 f No. Thread d2
    10 14 90 14 60 35 25 1.8 4 6 40 2 4 M12 (1/2") 14 0.580
    17.2 28
    15 20 95 14 65 35 30 2 4 6 45 2 0.648
    21.3 32
    20 25 105 16 85 38 42 2.3 4 6 58 2 0.952
    26.9 45
    25 30 115 16 85 38 42 2.6 4 6 68 2 1.14
    33.7 45
    32 38 140 16 100 40 52 2.6 4 6 78 2
    M16
    (5/8")
    18
    		 1.69
    42.4 56
    40 44.5 150 16 100 40 60 2.6 6 6 88 3 1.86
    48.3 64
    50 57 165 18 125 45 72 2.9 6 8 102 3 2.53
    60.3 75
    65 76.1 185 18 145 45 90 2.9 6 10 122 3 306
    80 88.9 200 20 160 50 105 3.2 8 10 138 3 4/8 3.70
    100 108 220 20 180 52 125 3.6 8 12 158 3
    8
    		 4.62
    114.3 131
    125 133 250 22 210 55 150 4 8 12 188 3 6.30
    139.7 156
    150 159 285 22 240 55 150 4 8 12 188 3 M20 (3/4") 23 7.75
    168.3 156
    175 191 315 24 270 60 208 5.4 10 12 242 3 8
    M20(3/4")
    23
    		 10.0
    193.7 210
    200 216 340 24 295 62 232 5.9 10 16 268 3
    12
    219.1 235 11.0
    250 267 405 26 355 70 285 6.3 12 16 320 3
    M24(7/8")
    27
    		 15.6
    273 292
    300 318 460 28 410 78 388 7.1 12 16 378 4 22.0
    323.9 344
    350 355.6 520 30 470 82 390 8 12 16 438 4 16
    368 28.7
    400 406.4 580 32 525 85 445 8 12 16 490 4 M27 (1") 30
    419 36.3
    500 508 715 34 650 90 548 8 12 16 610 4 20 M30 (1-1/8") 33
    521 59.3
    600 609.6 840 36 770 95 652 8.8 12 18 725 5 M33 (1-1/4") 36
    622 73.4
    700 711.2 910 36 840 100 755 8.8 12 18 795 5
    24
    720 75.0
    800 812.8 1025 38 950 105 855 10 12 20 900 5 M36 (1-3/8") 39
    820 99.0
    900 914.4 1125 40 1050 110 955 10 12 20 1000 5 28
    920 119
    1000 1016 1255 42 1170 120 1058 10 16 22 1115 5
    		M39 (1-1/2") 42
    1020 159

    DIN 2634 WELDING NECK FLANGE NOMINAL PRESSURE 25

    Pipe Flange Neck Raised
    face     		Bolts Weight of
    one flange
    (7.85 kg/dm3)
    kg.
    NW d1 D b k h1 d3 s r h2 d4 f No. Thread d2
    175 (191) 330 28 280 75 215 5.6 10 15 248 3 12
    		M24 (7/8") 27 13.4
    193.7 218
    200 216 360 30 310 80 240 6.3 10 16 278 3 17.0
    219.1 244
    250 267 425 32 370 88 292 7.1 12 18 335 3
    M27
    (1")
    30
    		 24.4
    273 298
    300 318 485 34 430 92 345 8 12 18 395 4 16
    323.9 352 31.2
    350 355.6 555 38 490 100 398 8 12 20 450 4 M30 (1-1/8") 33
    368 45.0
    400 406.4 620 40 550 110 452 8.8 12 20 505 4
    419 58.7
    500 508 730 44 660 125 558 10 12 20 615 4
    20
    		 M33 (1-1/4") 36
    521 86.1
    600 609.6 845 46 770 125 660 11 12 20 720 5 M36 (1-3/8") 39
    622 101

    DIN 2642, DIN CONNECTIONS LOOSE FLANGE FOR FLANGE COLLAR PN 10

    Nom
    Pipe
    size     		Flange
    D
    mm     		d5
    mm     		b
    mm     		r
    mm     		k
    mm

    Drilling
    Number

    		d2
    mm     		Weight
    kg     		Collar
    g
    mm
    10
    15
    20     		90
    95
    105     		16
    23
    28

    16
    16
    16

    5
    5
    5

    		60
    65
    75     		4
    4
    4

    15
    15
    15

    		0.23
    0.26
    0.30     		45
    50
    60

    25
    32
    40

    		115
    140
    150     		33
    42
    50     		16
    16
    16

    5
    5
    5

    		85
    100
    110

    4
    4
    4

    		15
    18
    18     		0.37
    0.54
    0.5     		70
    82
    0.92
    50
    65
    80     		165
    185
    200     		62
    81
    94     		18
    18
    20

    5
    5
    5

    		125
    145
    160

    4
    4
    4

    		18
    18
    18     		0.80
    0.90
    1.28     		107
    127
    142
    100
    125
    150     		220
    250
    285     		113
    138
    164     		20
    22
    22

    5
    6
    6

    		180
    210
    240     		8
    8
    8     		18
    18
    22    		 1.37
    1.78
    2.27     		162
    192
    218
    175
    200
    250     		315
    340
    395     		195
    222
    273     		24
    24
    26

    6
    7
    7

    		270
    295
    350     		8
    8
    12     		22
    22
    22     		2.90
    3.16
    4.22     		248
    273
    328
    300
    350
    400     		445
    505
    565     		324
    374
    426     		26
    26
    32

    7
    8
    8

    		400
    460
    515     		12
    16
    16     		22
    22
    25     		4.80
    5.85
    8.45     		378
    438
    490
    450
    500
    600     		615
    670
    780     		475
    530
    630     		32
    34
    36

    8
    8
    10

    		565
    620
    725     		20
    20
    20     		25
    25
    30     		9.45
    11.35
    15.30     		540
    595
    695
    700
    800     		895
    1015     		730
    832     		40
    44     		10
    10     		840
    950     		24
    24     		30
    34     		21.40
    30.50     		810
    916

    DIN 2635 WELDING NECK FLANGES NOMINAL PRESSURE 40

    Pipe Flange Neck Raised Bolts Weight of
    one flange
    7.85 kg/dm3)
    kg
    NW d1 D b k h1 d3 s r h2 d4 f No. Thread d2
    10 14 90 16 60 35 25 1.8 4 6 40 2 4 M12 (1/2") 14 0.661
    17.2 28
    15 20 95 16 65 38 30 2 4 6 45 2 0.746
    21.3 32
    20 25 105 18 75 40 38 2.3 4 6 58 2 106
    26.9 40
    25 30 115 18 85 40 42 2.6 4 6 68 2 1.29
    33.7 46
    32 38 140 18 100 42 52 2.6 6 6 78 2 1.88
    42.4 56
    40 44.5 150 18 110 45 60 2.6 6 7 88 3 2.33
    48.3 64
    50 57 165 20 125 48 72 2.9 6 8 102 3 M16 (5/8") 18 2.82
    60.3 75
    65 76.1 185 22 145 52 90 2.9 6 10 122 3 3.74
    80 88.9 200 24 160 58 105 3.2 8 12 138 3 4.75
    100 108 235 24 190 65 128 3.6 8 12 138 3 8 M20 (3/4") 23 6.52
    114.3 134
    125 133 270 26 220 68 155 4 8 12 188 3 8 M24 (7/8") 27 9.07
    139.7 162
    150 159 300 28 250 75 182 4.5 10 12 188 3 M24 (7/8") 11.8
    168.3 192
    175 191 350 32 295 82 215 5.6 10 16 285 3 12 M27 (1") 30 18.2
    193.7 218
    200 216 375 34 320 88 240 6.3 10 16 285 3 21.5
    219.1 244
    250 267 450 38 385 105 298 7.1 12 18 345 3 34.9
    273 306
    300 318 515 42 450 115 352 8 12 18 410 4 16 M30 (1-1/8") 33 49.7
    323.9 362
    350 355.6 580 46 510 125 408 8.8 12 20 460 4 M33 (1-1/4") 36
    368 68.1
    400 406.4 660 50 585 135 462 11 12 20 535 4 M36 (1-3/8") 39
    419 96.5
    500 508 755 52 670 140 562 14.2 12 20 615 4 20 M39 (1-1/2") 42
    521 117
  • Fittings Dimension

    BUTTWELD FITTINGS DIMENSIONAL STANDARD ANSI B-16.9, B-16.28, MS SS P43

    Nominal Pipe Size Outside Diameter Center to Face Back to Face Center to Center

    Length 'L'

    MS SS P43
    Inch. mm D A B C N E F G R M S

    L

    		 L
    1/2 15 21.3 38.0 16.0 25.0 - 25.0 48.0 - 76.0 - 35.0 50.8 76.2
    3/4 20 26.7 29.00 11.0 29.0 - 25.0 43.0 - 57.0 - 43.0 50.8 76.2
    1 25 33.4 38.00 22.0 38.0 25.0 38.0 56.0 41.0 76.0 51.0 51.0 50.8 101.6
    1 1/4 32 42.2 48.00 25.0 48.0 32.0 38.0 70.0 52.0 95.0 64.0 64.0 50.8 101.6
    1 1/2 40 48.3 57.15 29.0 57.0 38.0 38.0 83.0 62.0 114.0 76.0 73.0 50.8 101.6
    2 50 60.3 76.00 35.0 64.0 51.0 38.0 106.0 81.0 152.0 102.0 93.0 63.5 152.4
    21/2 65 73.0 95.25 44.0 76.0 64.0 38.0 132.0 100.0 191.0 127.0 105.0 63.5 152.4
    3 80 88.9 114.30 51.0 86.0 76.0 51.0 159.0 121.0 229.0 152.0 127.0 63.5 152.4
    31/2 90 101.6 133.35 57.0 95.0 89.0 64.0 184.0 140.0 267.0 178.0 140.0 76.2 152.4
    4 100 114.3 152.0 63.0 105.0 102.0 64.0 210.0 159.0 305.0 203.0 157.0 76.2 152.4
    5 125 141.3 190.0 79.0 123.0 127.0 76.0 262.0 197.0 381.0 254.0 186.0 76.2 203.2
    6 150 168.3 229.0 95.0 143.0 152.0 89.0 313.0 237.0 457.0 305.0 216.0 88.9 203.2
    8 200 219.1 305.0 127.0 178.0 203.0 102.0 414.0 313.0 610.0 406.0 270.0 101.6 203.2
    10 250 273.1 381.0 159.0 216.0 254.0 127.0 515.0 391.0 762.0 508.0 324.0 127.0 254.0
    12 300 323.9 457.0 190.0 254.0 303.0 152.0 619.0 467.0 914.0 610.0 381.0 152.4 254.0
    14 350 355.6 533.0 222.0 279.0 356.0 165.0 711.0 533.0 1067.0 711.0 413.0 152.4 305.0
    16 400 406.4 610.0 254.0 305.0 406.0 178.0 813.0 610.0 1219.0 813.0 470.0 152.4 305.0
    18 450.0 457.2 686.0 286.0 343.0 457.0 203.0 914.0 686.0 1372.0 914.0 533.0 152.4 305.0
    20 500 508.0 762.0 318.0 381.0 508.0 229.0 1016.0 762.0 1524.0 1016.0 584.0 152.4 305.0
    22 550 559.0 838.0 343.0 419.0 559.0 254.0 111.8 838.0 1676.0 1118.0 614.4 152.4 305.0
    24 600 610.0 914.0 381.0 432.0 610.0 267.0 1219.0 914.0 1829.0 1219.0 692.0 152.4 305.0
    26 650 660 991.0 406.0 495.0 660. 267.0  
    28 700 711 1067.0 438.0 521.0 771.0 267.0
    30 750 762 1143.0 470.0 589.0 762.0 267.0
    32 800 813 1219.0 502.0 597.0 813.0 267.0
    34 850 864 1295.0 533.0 635.0 864.0 267.0
    36 900 914 1372.0 565.0 673.0 914.0 267.0

    SOCKETWELD FITTINGS

    NOM
    BORE    		 PIPE
    O.D.    		 3000 LBS. Common Factors

    6000 LBS.
    A
    max.    		 B
    max.    		 K J L M N P Q C
    min.    		 D
    min.    		 O
    min.    		 O
    min.    		 A B M K N
    1/8" 10.3 22 18.5 26 16 40 17.3 32 17.5 10 10.7 10 5 8 22 22 20 25 46
    1/4" 13.7 22 22 26 18 43 21.2 32 17.5 10 14.1 10 5 8 27 25 24 25 51
    3/8" 17.2 25 25 26 19 48 25.4 36 19 10 17.6 10 3 9 27 28 28 26 60
    1/2" 21.3 27 32 30 21 51 31 43 22 10 21.7 10 6 13 31 34 34 31 72
    3/4" 26.7 34 38 36 24 57 37 50 25 13 27 13 6 13 37 42 41 35 80
    1" 33.4 37 46 40 25 64 45.2 60 27 13 33.8 13 9 17 42 50 50 40 94
    1 1/4" 42.2 42 56 40 29 70 55 70 30 13 42.6 13 9 17 47 59 58 41 100
    1 1/2" 48.3 47 62 40 30 79 61.4 78 32 13 61.2 16 15 23 59 84 83 55  
    2" 60.3 56 75 52 37 89 75 95 38 13 61.2 16 15 23 59 84 83 55  
    2 1/2" 73.02 60 92 52 48 114 91.3 125 38 16 73.8 16 14 24   102   56  
    3" 89.00 76 110 52 51 127 108.8 140 44 16 89.8 16 14 24   121   58  
    4" 114.50 88 137 58   150 136.9   48 19 115.5 19 14 24   152   64  

    ELBOW

    Nom. Pipe
    Size mm
    Dia. Nom.    		 A B D E O K Os Ks
    15 38 16 - 25 76 48 - -
    20 28 11 - 25 57 43 - -
    25 38 22 25 38 76 56 51 41
    32 48 25 32 38 95 70 64 52
    40 57 28 38 38 114 83 76 62
    50 76 35 51 38 152 106 102 81
    65 95 44 64 38 190 132 127 100
    80 114 51 76 51 229 159 152 121
    90 133 57 89 64 267 184 178 140
    100 152 64 102 64 305 210 203 159
    125 190 79 127 76 381 262 254 197
    150 229 95 152 89 457 313 305 236
    200 305 127 203 102 610 414 406 313
    250 381 159 254 127 762 518 508 391
    300 457 190 305 152 914 619 610 467
    350 533 222 356 165 1067 711 711 533
    400 610 254 406 178 1219 813 813 610
    450 686 286 457 203 1372 914 914 686
    500 762 318 508 229 1524 1016 1016 762
    550 838 343 - 254 1676 1118 - -
    600 914 381 610 267 1829 1219 1219 914
    650 991 06 - 267 1981 1321 - -
    700 1067 438 - 267 - - - -
    750 1143 470 762 267 2286 1524 1524 1143
    800 1219 502 - 267 - - - -
    850 1295 533 - 267 - - - -
    900 1372 565 914 267 - - 1829 1372
    1100 1600 660 - 305 - - - -
    1200 1829 759 1219 343 - - - -
    Nom. Pipe
    Size mm
    Dia. Nom.    		 A B Nom. Pipe
    Size
    Dia. Nom.    		 F G Nom. Pipe
    Size
    Dia. Nom.    		 C A B Nom. Pipe
    Size
    Dia. Nom.    		 O K
    50 152 64 15 76 35 40 25 57 83 25 102 67
    80 229 95 20 76 43 50 32 76 108 32 127 84
    100 305 127 25 102 51 65 32 95 127 40 152 100
    150 457 190 32 102 64 80 32 114 146 50 203 132
    200 610 254 40 102 73 90 38 133 171 65 254 164
    250 762 318 50 152 92 100 38 152 190 - - -
    300 914 381 65 152 105 125 38 190 229 - - -
    350 1067 444 80 152 127 150 44 229 273 - - -
    400 1219 505 90 152 140 200 44 305 349 - - -
    450 1372 568 100 152 157 250 51 381 432 - - -
    500 1524 632 125 203 186 300 64 457 521 - - -
    550 1676 694 150 203 216 - - - - - - -
    600 1829 757 200 203 270 - - - - - - -
    650 1981 821 250 254 324 - - - - - - -
    750 2286 946 300 254 381 - - - - - - -
    850 2591 1073 350 305 413 - - - - - - -
    900 2743 1137 400 305 470 - - - - - - -
    1100 3200 1326 450 305 533 - - - - - - -
    1200 3658 1516 500 305 584 - - - - - - -
    - - - 550 305 641 - - - - - - -
    - - - 600 305 692 - - - - - - -

    TEE

    Non. Pipe Size mm. Dia. Normal Center to End of Run Center to End of Branch Nom. Pipe Size Nominal Center to End of Run Center to End of Branch
    Run Branch C M Run Branch C M
      6 25 25   25 86 67
    15 10 25 25   32 86 70
      15 25 25 80 40 86 73
      10 28 28   50 86 76
    20 15 28 28   65 86 83
      20 28 28   80 86 86
      10 34 34   40 95 79
    25 15 34 34   50 95 83
      20 34 34 90 65 95 89
      25 34 34   80 95 92
      15 48 48   90 95 95
    32 20 48 48   40 105 86
      25 48 48   50 105 89
      32 48 48 100 65 105 95
      15 57 57   80 105 99
      20 57 57   90 105 12
    40 25 57     100 105 105

    REDUCER

    Nom. Pipe Size mm Dia. Nominal H Nom. Pipe Size Dia. Nominal H Nom. Pipe Size Dia. Nominal H
    Lg. End sm. End - Lg. End sm. End - Lg. End sm. End -
    20 10 38 90 32 102 250 100 178
    - 15 38 - 40 102 - 125 178
    25 10 51 - 50 102 - 150 178
    - 15 51 - 65 102 - 200 178
    - 20 51 - 80 102 300 125 203
    32 15 51 100 40 102 - 150 203
    - 20 51 - 50 102 - 200 203
    - 25 51 - 65 102 - 250 203
    40 15 64 - 80 102 350 150 330
    - 20 64 - 90 102 - 200 330
    - 25 64 125 50 127 - 250 330
  • Pipes

    STAINLESS STEEL PIPE

    NOMINAL WALL THICKNESS
    NOMINAL PIPE OUT SIDE SCHED SCHED SCHED SCHED SCHED. STANDA SCHED SCHED EXTRA STRONG SCHED SCHED SCHED SCHED. SCHED XX STRONG
    SIZE DIA 5S 10S 10 20 30 RD (STD) 60 40/40S (XS) 80/805 100 120 140 160 XXS
    6 mm 10.3 889 1.24       1.73 1.73 2.41 2.41          
    8 mm 13.7 1.24 1.65       2.24 2.24 3.02 3.02          
    10 mm 17.1 1.24 1.65       2.31 231 3.20 3.20          
    15 mm 21.3 1.65 2.11       2.77 2.77 3.73 3.73       4.75 7.47
    20 mm 26.7 1.65 2.17       2.87 2.87 3.91 3.91       5.54 7.82
    25 mm 33.4 1.65 2.77       3.38 3.38 4.55 4.55       6.35 9.09
    mm 42.2 1.65 2.77       3.56 3.56 4.85 4.85       6.35 9.50
    40 mm 48.3 1.65 2.77       3.68 3.68 5.08 5.08       7.14 10.16
    50 mm 60.3 1.65 2.77       3.91 3.91 5.54 5.54       8.71 11.07
    65 mm 73.0 2.11 3.05       5.16 5.16 7.01 7.01       9.52 14.02
    80 mm 88.9 2.11 3.05       5.49 5.49 7.62 7.62       11.12 15.24
    90 mm 101.6 2.11 3.06       5.74 5.74 8.07 8.07          
    100 mm 114.3 2.11 3.05       6.02 6.02 8.56 8.56   11.12   13.49 17.12
    125 mm 141.3 2.77 3.40       6.55 6.55 9.53 9.53   12.7   15.88 19.05
    150 mm 168.3 2.77 3.40       7.11 7.11 12.70 12.70   14.27   18.26 21.95
    200 mm 219.1 2.77 3.76   6.35 7.04 8.18 8.18 12.70 10.31 12.70 15.06 18.24 20.62 23.01 22.23
    250 mm 273.00 3.40 4.19   6.35 7.80 9.27 9.27 12.70 12.70 15.06 18.24 21.41 25.40 28.58 25.40
    300 mm 323.8 3.96 4.57   6.35 8.38 9.52 10.31 12.70 14.27 17.45 21.41 25.4 28.58 33.32 25.4
    350 mm 355.6 3.96 4.78 6.35 7.92 9.52 9.52 11.13 15.06 12.70 19.05 23.80 27.76 31.75 35.71  
    400 mm 406.4 4.19 4.78 6.35 7.92 9.52 9.52 12.70 16.66 12.70 21.41 26.19 30.94 36.53 40.46  
    450 mm 457.2 4.19 4.78 6.35 7.92 11.12 9.52 14.27 19.05 12.70 23.82 29.36 34.92 39.69 45.24  
    500 mm 508.0 4.78 5.54 6.38 9.52 12.70 9.52 15.08 12.70 20.62 26.13 32.54 38.10 44.45 50.01  

    SEAMLESS PIPE

    Normal Size Outside Diameter Wall Thickness Class

    Sched

    No.

    		 Plain End
    Normal Weight Test Presure min.
    Butt Welded Grade A Grade B 
    in in mm in mm 1b/ft kg/ft. kg/m psi kg/cm2 psi kg/cm2 psi kg/cm2
    1/8 405 10.3 068 1.7 std 40 24 11 36 700 49.2 700 49.2 700 49.2
          095 2.4 XS 80 31 14 46 850 59.8 850 59.8 850 59.8
    1/4 540 13.7 088 2.2 std. 40 42 19 63 700 49.2 700 49.2 700 49.2
          119 3.0 XS 80 54 24 .80 850 59.8 850 59.8 850 59.8
    3/8 675 17.1 091 2.2 std. 40 57 26 85 700 49.2 700 49.2 700 49.2
          126 3.2 XS 80 74 34 1.10 850 59.8 850 59.8 850 59.8
    1/2 840 21.3 109 2.8 std. 40 85 39 1.26 700 49.2 700 49.2 700 49.2
          147 3.7 XS 80 1.09 49 1.62 850 59.8 850 59.8 850 59.8
          294 7.5 XXS   1.71 78 2.54 1000 70.3 1000 70.3 1000 70.3
    3/4 1.050 26.7 113 2.9 std. 40 1.13 51 1.68 700 49.2 700 49.2 700 49.2
          154 3.9 XS 80 1.47 67 2.19 8850 59.8 850 59.8 850 59.8
          308 7.8 XXS   2.44 1.11 3.63 1000 70.3 1000 70.3 1000 70.3
    1 1.315 33.4 .133 3.4 std. 40 1.68 76 2.50 700 49.2 700 49.2 700 49.2
          179 4.5 XS 80 2.17 98 3.23 850 59.8 850 59.8 850 59.8
          358 9.1 XXS   3.66 1.66 5.45 1000 70.3 1000 70.3 1000 70.3
    11/4 1.660 42.2 140 3.6 std. 40 2.27 1.03 3.38 1000 70.3 1000 70.3 1100 77.3
          191 4.9 XS 80 3.00 1.36 4.46 1300 91.4 1500 105.5 1600 112.5
          382 9.7 XXS   5.21 2.36 7.75 1400 98.4 1800 126.6 1900 133.6
    11/2 1.990 48.3 145 3.7 std. 40 2.72 1.23 4.05 1000 70.3 1000 70.3 1100 77.3
          200 5.1 XS 80 3.36 1.65 5.40 1300 91.4 1500 105.5 1600 112.5
          400 10.2 XXS   6.41 2.91 9.54 1400 98.4 1800 126.6 1900 133.6
    2 2.375 60.3 154 3.9 std. 40 3.65 1.66 5.43 1000 70.3 2300 161.7 2500 175.8
          218 5.5 XS 80 5.02 2.28 7.47 1300 91.4 2500 175.8 2500 175.8
          344 8.7   160 7.46 3.38 11.10     2500 175.8 2500 175.8
    21/2 2.875 73.0 203 5.2 std 40 5.79 2.63 8.62 1000 70.3 2500 175.8 2500 175.8
          276 7.0 XS 80 7.66 3.47 11.40 1300 91.4 2500 175.8 2500 175.8
          375 9.5   160 10.01 4.54 14.90 1400 98.4 2500 175.8 2500 175.8
          552 14.0 XXS   13.70 6.21 20.39 1400 98.4 2500 175.8 2500 175.8
    3 3500 88.9 188 4.8     6.63 3.01 9.87 1000 70.3        
          216 5.5 std 40 7.58 3.44 11.28 1000 70.3 2200 154.7 2500 175.8
          300 7.6 XS 80 10.25 4.65 15.25 1300 91.4 2500 175.8 2500 175.8
          438 11.1   160 14.31 6.49 21.30     2500 175.8 2500 175.8
          600 15.2 XXS   18.58 8.43 27.65     2500 175.8 2500 175.8
    31/2 4000 101.6 188 4.8     7.63 3.46 11.35 1200 84.4        
          226 5.7 std 40 9.11 4.13 13.56 1200 84.4 2000 140.6 2400 168.7
          318 8.1 XS   12.51 5.67 18.62 1700 199.5 2800 196.9 2800 196.9
      4.500 114.3 156 4.0     7.25 3.29 10.79 1000 70.3        
          188 4.8     8.64 3.92 12.86 1200 84.4        
          219 5.6 std.   10.00 4.54 14.88 1200 84.4        
          237 6.0 XS 40 10.79 4.89 16.06 1200 84.4 1900 133.6 2200 154.7
          337 8.6   80 14.98 6.79 22.29 1700 119.5 2700   2800 196.9
          438 11.1   120 18.98 8.61 28.25     2800 189.8 2800 196.9
          531 13.5   160 22.52 10.21 33.51     2800 196.9 2800 196.9
          674 17.1 XXS   27.54 12.49 40.98     2800 196.9 2800 196.9
                              196.9    
    5 5.563 141.3 258 6.6 std 40 14.62 6.63 21.76     1700 119.5 1900 133.6
          375 9.5   80 20.78 9.43 30.92     2400 168.7 2800 196.9
          500 12.7 XS 120 27.04 12.27 40.24     2800 196.9 2800 196.9
          625 15.9   160 32.96 14.95 49.95     2800 196.9 2800 196.9
          750 19.9 XXS   38.55 17.49 57.37     2800 196.9 2800 196.9
          432 11.0 XS 80 28.57 12.96 42.52     2300 161.7 2700 189.8
          562 14.3   120 36.42 16.52 54.20     2800 196.9 2800 196.9
          719 18.3   160 45.34 20.57 67.47     2800 196.9 2800 196.9
          864 21.9 XXS   53.16 24.11 79.11      2800 196.9 2800 196.9
     8 8.625 219.1 250 6.4   20 22.36 10.14 33.28      1000 70.3 1200 84.4
          277 7.0   30 24.70 11.20 36.76     1200 84.4 1300 91.4
          322 8.2 std 40 28.55 12.95 42.49     1300 91.4 1600 112.5
          406 10.3   60 35.66 16.18 53.07     1700 119.5 2000 140.6
          500 12.7 XS 80 43.39 19.68 64.57     2100 147.7 2400 168.7
          594 15.1   100 50.93 23.10 75.79     2600 175.8 2800 196.9
          .719 18.3   120 60.69 27.53 90.32     2800 196.9 2800 196.9
          812 20.6   140 67.79 30.75 100.88     2800 196.9 2800 196.9
          875 22.2 XXS   72.42 32.85 107.77     2800 196.9 2800 196.9
          906 23.0   160 74.71 33.89 111.18     2800 196.9 2800 196.9
    10 10.750 273.0 250 6.4   20 28.04 12.72 41.73     850 59.8 1000 70.3
          379 7.1   30 31.20 14.15 46.43     950 66.8 1100 77.3
          307 7.8   40 34.24 15.53 50.95     1000 70.3 1200 84.4
          365 9.3 std 60 40.48 18.36 60.24     1200 84.4 1400 98.4
          500 12.7   80 54.74 24.83 81.46     1700 119.5 2000 140.6
          594 15.1 XS 100 64.46 29.21 95.84     2000 140.6 2300 161.7
          719 18.3   120 77.00 34.83 114.59     2400 168.7 2800 196.9
          844 21.4   140 89.27 40.49 132.85     2800 196.9 2800 196.9
          1000 25.4     104.13 47.23 154.96     2800 196.9 2800 196.9
          1125 28.6 XXS 160 115.05 52.46 172.11     2800 196.9 2800 196.9
    12 12.750 323.8 250 6.4   20 33.38 15.14 49.67     700 49.2 800 56.2
          330 8.4   30 43.77 19.85 15.14     950 66.8 1100 77.3
          375 9.5 std   49.56 22.48 73.75     1100 77.3 1200 84.4
          406 10.3   40 53.56 24.29 79.71     1100 77.3 1300 91.4
          500 12.7 XS   65.42 29.67 97.36     1400 98.4 1600 112.5
          562 14.3   60 73.22 33.21 108.96     1600 112.5 1900 133.6
          688 17.5   80 88.57 40.17 131.81     1900 133.6 2300 161.7
          844 21.4   100 107.29 48.67 159.66     2400 168.7 2800 196.9
          1000 25.4 XXS 120 125.49 56.92 186.75     2800 196.9 2800 196.9
          1125 28.6   140 139.68 63.36 207.87     2800 196.9 2800 196.9
          1312 33.3   160 160.33 72.72 238.60     2800 196.9 2800 196.9
    14 14000 355.6 250 6.4   10 36.71 16.65 54.63     650 45.7 750 52.7
          312 7,9   20 45.68 20.72 67.98     800 56.2 950 66.8
          375 9.5 std 30 54.57 24.75 81.21     950 66.8 1100 77.3
          438 11.1   40 63.37 28.74 94.30     1100 77.3 1300 91.4
          500 12.7     72.09 32.70 107.28     1300 91.4 1300 105.5
          594 15.1 XS 60 85.01 38.56 126.51     1500 105.5 1500 126.6
          750 19.0   80 106.13 48.14 157.94     1900 133.6 2800 161.7
          938 23.8   100 130.79 59.33 194.64     2400 168.7 2800 196.9
          1.094 27.8   120 150.76 68.38 224.36     2800 196.9 2800 196.9
          1.250 21.8   140 170.22 77.21 253.31     2800 196.9 2800 196.9
          1.406 35,7   160 189.15 85.80 281.49     2800 196.9 2800 196.9
          312 7.9   20 52.36 23.75 77.92     700 38.7 800 56.2
          375 9.5 std 30 62.58 28.39 93.13     850 49.2 1000 70.3
          500 12.7 XS 40 82.77 37.54 123.18     1100 59.8 1300 91.4
          656 16.7   60 107.54 48.78 160.04     1500 77.3 1700 119.5
          844 21.4   80 136.58 61.95 203.25     1900 105.5 2200 154.7
          1.031 26.2   100 164.86 74.78 245.34     2300 133.6 2700 189.8
          1.219 31.0   120 192.40 82.27 286.32     2700 161.7 2800 196.9
          1.438 36.5   140 223.57 101.41 332.71     2800 189.8 2800 196.9
          1.594 40.5   160 245.22 111.23 364.93     2800 196.9 2800 196.9
                              196.9    
    18 18.000 457,2 250 6.4   10   21.50 70.53     500 35.2 600 42.2
          312 7.9   20 47.39 26.28 87.85     600 42.2 750 52.7
          275 9.5 std   59.03 32.02 105.05     750 52.7 900 63.3
          438 11.1   30 70.59 37.22 122.12     900 63.3 1000 70.3
          500 12.7 XS   82.06 42.39 139.07     1000 70.3 1200 84.4
          562 14.3   40 93.45 47.52 155.90     1100 77.3 1300 91.4
          750 19.0   60 104.76 62.67 205.62     1500 105.5 1800 126.6
          938 23.8   80 138.17 77.49 254.24     1900 133.6 2200 154.7
          1.156 29.4   100 170.84 94.35 309.54     2300 161.7 2700 189.8
          1.375 34.9   120 208.00 110.74 363.32     2800 196.9 2800 196.9
          1.562 39.7   140 244.14 124.42 408.20     2800 196.9 2800 196.9
          1.781 45.2   160 274.30 139.96 459.17     2800 196.9 2800 196.9
                  308.55                
    20 20.000 508.0 250 6.4   10 52.73 23.92 78.47     450 31.6 500 35.2
          375 9.5 std 20 18.60 35.65 116.97     700 49.2 800 56.2
          500 12.7 XS. 30 104.13 47.23 154.97     900 63.3 1000 70.3
          594 15.1   40 123.06 55.82 183.13     1100 77.3 1200 84.4
          812 20.6   60 166.50 75.52 247.78     1500 105.5 1700 119.5
          1031 26.2   80 208.92 94.76 310.91     1900 133.6 2200 154.7
          1281 32.5   100 256.15 116.19 381.19     2300 161.7 2700 189.8
          1500 38.1   120 296.37 134.43 441.05     2700 189.8 2800 196.9
          1750 44.4   140 341.10 154.72 507.61     2800 196.9 2800 196.9
          1969 50.0   160 379.14 171.98 564.22     2800 196.9 2800 196.9
    24 24.000 609.6 250 6.4   10 63.41 28.76 94.36     400 28.1 450 31.6
          375 9.5 std 20 94.62 42.92 140.81     550 38,7 650 45.7
          500 12.7 XS.   125.49 56.92 186.75     750 52.7 900 63.3
          562 14.3   30 140.80 63.87 209.53     850 59.8 1000 70.3
          688 17.5   40 171.17 77.64 254.73     1000 70.3 1200 84.4
          938 23.8     230.92 104.74 343.65            
          969 24.6   60 238.29 108.09 354.61     1500 105.5 1700 119.5
          1.219 31.0   90 296.53 134.50 441.28     1800 126.6 2100 147,7
          1.531 38.9   100 367.45 166.67 546.82     2300 161.7 2700 189.8
          1.812 46.0   120 429.50 194.82 639.16     2700 189.8 2800 196.9
          2.062 52.4   140 483.24 219.19 719.14     2800 196.9 2800 196.9
          2.344 59.5   160 542.09 245.89 806.72     2800 196.9 2800 196.9
  • Non-ferrous Metal
    CHEMICAL COMPOSITION OF MONEL HASTELLOY, INCOLY & INCONEL
    U.S.A./GROSSBRITAINNIE U.S.A. GRANDE-BRETAGNE U.S.A. / GREAT BRITAIN
    Analyses Analyses Composition

    Handelsbezeichung

    Designation

    Comercial

    Comercial

    		 C% Co% Cr% Mo% Ni% V% W% Ai% Cu%

    Nb/Cb

    Ta%

    		 Ti% Fe%

    Sonstige Autres-

    Other%
    Monel 400 0.12       65.0       32.0 -   1.5 Mn 1.0
    Monel 401 0.10       43.0       53.0 - - 0.75 Si 0.25 Mn 2.25
    Monel 404 0.15       52.0-     0.05 rest/bal   - 0.50 Mn 0.10; Si
              57,0               0.10;S 0.024
    Monel 502 0.10       63.0-     2.5- rest/bal   0.50 2.0 Mn 1.5;Si 0.5; S
              17,0     3.5         0.010
    Monel K 500 0.13       64.0 - - 2.8 30.0   0.6 1.0 Mr 0,8
    Monel R 405 0.15       66.0   - - 31.0 -   1,2 Mn 1.0; 0.04
    Hastelloy B 0.10 1.25 0.60 28.0 rest/bal 0.30   -   - - 5,50 Mn 0.80 Si 0,70
    Hastelloy B2 0.02 1.0 1.0 26.0- rest/bal         - - 2.0 Mn 1.0 Si 0.10
            30.0                  
    Hastelloy C 0.07 1.25 16.0 17.0 rest/bal 0.30 40   -     5.75 Mn 1.0 Si 0.70
    Hastelloy C4 0.015 2.0 14.0- 14.0- rest/bal         - 0.70 3.0 Mn 1.0 Si 0.08
          18.0 17.0                  
    Hastelloy C 276 0.02 2.5 14.0- 15.0- rest/bal 0.35 3.0-         4.0-7.0 Mn 1.0;Si 0.05
          16.5 17.0     4.5            
    Hastelloy F 0.02 1.25 22.0 6.5 rest/bal   0.50     Nb2.10   21.0 Mn 1.50;Si 0.50
    Hastelloy G 0.05 2.5 21.0- 5.5- rest/bal   1.0   1.5-2.5 Nb1.75-   18.0- Mn 1.0-
          23.5 7.5           2.5   21,0 2.0;p0.04;Si
      0.03   23.0- 5.0- 47.0-       0.70-   0.70- rest/bal 1.0.80.03
    Hastelloy G-2     26.0 7.0 52.0       1,20   1.50   Mn 1.0;Si 1.0
    Hastelloy N 0.06 0.25 7.0 16.5 rest/bal   0,20   0.10     3,0 Mn 0.40;Si
                              0.25;B0.01
    Hastelloy S 0.02 2.0 15.5 14.5 rest/bal 0.6 1.0 0.20       3.0 Mn 0.50:Si
                              0.40;B0.0009;
                              0.02
    Hastelloy W 0.06 1.25 5.0 24.5 rest/bal             5.5 Mn 0.050 Si
      0.10 1.50 22.0 9.0 rest/bal   0.60       18.5   0.50
    Hastelloy X 0,04   21.0   32.0     0.3     0.4 45,0 Mn 0.6; Si 0.60
    Incoloy 800 0.08   21.0   32.0   - 0.3   - 0.4 45,0  
    Incoloy 800 H 0.05   20.5   32.0 - -   - - 1.1 45,0 -
    Incoloy 801           - - - - -     -
    Incoloy 802 0.35   21.0   32.0 - - 0.6 - - 0.7 45,0 -
    Incoloy 804 0.05   29.5   41.0 - - 0.3 - - 0.6 25.4 -
    Incoloy 805 0.12   7.5 0.50 36.0 - - - 0.10 -   rest/bal Mn 0.60;Si 0.50
    Incoloy 810 0.25   21.0   32.0 - - - 0,50 -   rest/bal Mn 0.90 Si 0.80
    Incoloy 825 0.04   21.0 3.0 42.0   - - 2.0   1.0 30,0  
    Incoloy 825 Cp 0.04   21.5 3.0 42.0   - - 2.2 Nb0.9   30,0 -
    Incoloy 840 0.08   20.0   20.0             rest/bal Mn 1.0;Si 1.0
    Incoloy 901 0.05   12.5 6.0 rest/bal     0.15     2.70 34.0 Mn 0.24:S
                              0.12.80.015
    Incoloy 901 Mod 0.05   12.5 5.80 rest/bal           2.9 34.0 Mn 0.09:Si
      0.02 15.0     38.0     0.7   Nb 3.0 1.4 41.0 0.08;B0.015
    Incoloy 903 0.02 14.0   - 33.0   -       1.7 50,0 -
    Incoloy 904 0.06   18.0 - 37.0 - - - -     42.0 -
    Incoloy DS                 -       Mn 1.0;Si2
    Incoloy Ma 956     20.0       - 4.5   - 0.5 74,4 Y2.03 0.5
    Incoloy 600 0.05   15.5   75.0       - -   8,0 -
    Incoloy 601 0.05   23.0   60.0 - - 1.4       14.0 -
    Incoloy 604 0.04   15.8   rest/bal   -   0.10 Nb 2.0   7.20 Mn 0.20 Si0,20
    Incoloy 610 0.20   15.5   rest/bal   -   0.50 Nb 1.0   9.0 Mn 0.90;Si 2.0
    Incoloy 617 0.07 12.5 22.5 9.0 54.0 - - 1.0          
    Incoloy 625 0.05   21.5 9.0 61.0 - - 0.40 - Nb 3.65 0.40 2.5 Mn 0.50; Si 0.50
    Incoloy 671 0.05   48.0   51.0   -       0.35    
    Incoloy 700 0.12 28.5 15.0 3.75 46,0   - 3,0 0.05   2,20 0.70 Mn 0.10;Si0.30
    Incoloy 702 0.04   15.6   rest/bal     3.4 0.10   0.70 0.35 Mn 0.05:Si 0.20
    Incoloy 705 0.30   15.5   rest/bal   -   0.50     8.0 Mn 0.90 Si5.5
  • Weight Formula

    1. 1. Weight of Stainless Steel Pipes & Tubes
      OD(mm)-W.T. (mm) x W.T.(mm)x0.02466=Kg.per Mtr.

    2. 2. Sheet Width Required for rolled and welded pipes
      O.D.(mm) - THK(mm) x 3.14=SheetWidth

    3. 3. Weight of Stainless Steel Sheets
      Length (mtr.) x Wdth(mtr.) x Thk(mm)x8=Kg Per Sheet

    4. 4. Weight of Stainless Steel Circle & Blanks
      OD(mm) x OD>(mm) x Thk(mm)/160/1000=Kg Per Pcs.

    5. 5. Weight of Stainless Steel Rounds
      Dia.(mm)xdia.(mm) x 0.00623=PerMtr.

    6. 6. Weight of Stainless Steel Hexagonal Rods
      Dia.(mm)xDia.(mm) x 0.00679=PerMtr.

    7. 7. Weight of Stainless Steel round Bars
      Dia.(mm)xDia.(mm) x 0.00787=PerMtr.

    8. 8. Weight of Carbon Steel Pipes & Tubes
      Dia.(mm)-W.T.(mm) XW.T.(mm) x 0.02466=Kg.PerMtr.

    9. 9. Weight of Carbon Steel Sheets & Plates
      Length (mtr.) x Wdth(mtr.) x Thk(mm) x 7.85=Kg Per Sheet

    10. 10. Weight of Copper Pipes
      OD(mm)-W.T. (mm) X W.T.(mm) x 0.0256=Kg.per Mtr.

    11. 11. Weight of Lead Pipes(appro.)
      OD(mm)-W.T. (mm) XW.T.(mm) x 0.0345=per Mtr.

    12. 12. Weight of Lead Sheets(appro.)
      Length (mtr.) XWidth(mtr.) XThk(mm) x 11.2=Kg Per Sheet

    13. 13. Weight of Alluminium Pipes(appro.)
      OD(mm)-W.T. (mm) XW.T.(mm) x 0.0082=Kg per Mtr.

    14. 14. Weight of Alluminium Sheets(appro.)
      Length (mtr.) X Width(mtr.) X Thk(mm) x 2.66=Kg Per Sheet

      Tensile Strength Conversion Table
      1. Kg/mm2 x 9.81 = N/mm2=MPa
      2. PSi x 0.0007 = Kg/mm2
      3. KSi x 1000 = PSi
      4. Kg/mm2 x 1.422 = KSi